Drywall Repair cost in Phoenix, AZ
Phoenix, AZ · updated August 2026
$1,200
Typical local cost
$400 – $4,600
Typical range
- per sheet replaced
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $125 in fees
1-3 days including finishing
Phoenix runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Phoenix homeowners pay around $1,200. The local adjustment for this trade is x1.024 — driven mainly by Maricopa County labor rates and 5% exposure to local code requirements.
Estimate your Phoenix job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $352 – $572
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $1,200 |
| 8 sheet replaced | $400 – $1,600 |
| 10 sheet replaced | $500 – $2,000 |
| 13 sheet replaced | $700 – $2,600 |
| 17 sheet replaced | $900 – $3,400 |
Based on Phoenix pricing of $50–$200 per sheet replaced.
Where the money goes
- Labor
- $900
- 71% of median
- Materials
- $300
- 24% of median
- Permit & fees
- $65
- 5% of median
Phoenix project costs+2% vs U.S. average
Based on Maricopa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Phoenix labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$52–$68
Interior crews in Maricopa County · +3% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$900
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Phoenix wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Maricopa County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Phoenix differs from the national average
The local delta, broken into dollars by driver.
Basis: Decomposition of the modeled Phoenix median against the U.S. median for this scope. · City of Phoenix building department, Hometriva methodology
Phoenix vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Phoenix
$1,265
Likely range $465 – $4,665
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Phoenix building departmentModeled estimate |
| electrical | City of Phoenix building departmentModeled estimate |
| mechanical | City of Phoenix building departmentModeled estimate |
| plumbing | City of Phoenix building departmentModeled estimate |
| zoning | City of Phoenix building departmentModeled estimate |
| fire | City of Phoenix building departmentModeled estimate |
Permit requirement in Phoenix
Usually no permit is required in Phoenix, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Phoenix building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$125Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Minimal18/100
Extreme cooling load and intense UV shorten roof and exterior finish life; Phoenix Planning & Development permits inside city limits while unincorporated Maricopa County work goes to the county.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Phoenix (this page) | x1.024 | $1,200 | $50 – $200 |
| Tucson | x0.934 | $1,100 | $50 – $150 |
| Las Vegas | x1.036 | $1,200 | $50 – $200 |
| Albuquerque | x0.922 | $1,100 | $50 – $150 |
What Phoenix homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Phoenix
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Phoenix drywall costs
Hometriva does not publish invented city prices. The Phoenix estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.026
Phoenix-area trade labor rates, weighted at 76% of this job.
- Material factorx1.011
Material and delivery pricing into Maricopa County, weighted at 24%.
- Regulatory factorx1.038
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.024
Blended Phoenix adjustment specific to drywall repair.
- Permit component$0 – $125
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Phoenix carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Phoenix, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
- City of Phoenix building department
- Phoenix permit portal
- Arizona Registrar of Contractors
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.