Drywall Repair cost in Birmingham, AL
Birmingham, AL · updated August 2026
$1,100
Typical local cost
$300 – $4,000
Typical range
- per sheet replaced
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $115 in fees
1-3 days including finishing
Birmingham runs -11% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Birmingham homeowners pay around $1,100. The local adjustment for this trade is x0.889 — driven mainly by Jefferson County labor rates and 5% exposure to local code requirements.
Estimate your Birmingham job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $317 – $515
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $900 |
| 8 sheet replaced | $400 – $1,200 |
| 10 sheet replaced | $500 – $1,500 |
| 13 sheet replaced | $700 – $2,000 |
| 17 sheet replaced | $900 – $2,600 |
Based on Birmingham pricing of $50–$150 per sheet replaced.
Where the money goes
- Labor
- $800
- 69% of median
- Materials
- $300
- 26% of median
- Permit & fees
- $60
- 5% of median
Birmingham project costs-11% vs U.S. average
Based on Jefferson County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Birmingham labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$44–$58
Interior crews in Jefferson County · -13% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$800
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Birmingham wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Jefferson County labor factor (x0.870). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Birmingham differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$125
Jefferson County crews price 13% below the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled Birmingham median against the U.S. median for this scope. · City of Birmingham building department, Hometriva methodology
Birmingham vs Alabama vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Birmingham
$1,160
Likely range $360 – $4,060
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Birmingham building departmentModeled estimate |
| electrical | City of Birmingham building departmentModeled estimate |
| mechanical | City of Birmingham building departmentModeled estimate |
| plumbing | City of Birmingham building departmentModeled estimate |
| zoning | City of Birmingham building departmentModeled estimate |
| fire | City of Birmingham building departmentModeled estimate |
Permit requirement in Birmingham
Usually no permit is required in Birmingham, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Birmingham building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$115Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
High74/100
Severe-weather exposure with low labor rates; tornado-related roof and siding replacement is a large share of local volume.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Birmingham (this page) | x0.889 | $1,100 | $50 – $150 |
| Atlanta | x0.992 | $1,200 | $50 – $200 |
| Memphis | x0.889 | $1,100 | $50 – $150 |
| New Orleans | x1.066 | $1,300 | $50 – $200 |
What Birmingham homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Birmingham
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Birmingham drywall costs
Hometriva does not publish invented city prices. The Birmingham estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx0.870
Birmingham-area trade labor rates, weighted at 76% of this job.
- Material factorx0.947
Material and delivery pricing into Jefferson County, weighted at 24%.
- Regulatory factorx1.010
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.889
Blended Birmingham adjustment specific to drywall repair.
- Permit component$0 – $115
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Birmingham carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Birmingham, AL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
- City of Birmingham building department
- Birmingham permit portal
- Alabama Building Commission
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.