Drywall Repair cost in Kansas City, MO
Kansas City, MO · updated August 2026
$1,200
Typical local cost
$300 – $4,400
Typical range
- per sheet replaced
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $120 in fees
1-3 days including finishing
Kansas City runs -2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Kansas City homeowners pay around $1,200. The local adjustment for this trade is x0.979 — driven mainly by Jackson County labor rates and 5% exposure to local code requirements.
Estimate your Kansas City job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $317 – $515
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $1,200 |
| 8 sheet replaced | $400 – $1,600 |
| 10 sheet replaced | $500 – $2,000 |
| 13 sheet replaced | $700 – $2,600 |
| 17 sheet replaced | $900 – $3,400 |
Based on Kansas City pricing of $50–$200 per sheet replaced.
Where the money goes
- Labor
- $900
- 71% of median
- Materials
- $300
- 24% of median
- Permit & fees
- $60
- 5% of median
Kansas City project costs-2% vs U.S. average
Based on Jackson County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Kansas City labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$50–$64
Interior crews in Jackson County · -3% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$900
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Kansas City wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Jackson County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Kansas City differs from the national average
The local delta, broken into dollars by driver.
Basis: Decomposition of the modeled Kansas City median against the U.S. median for this scope. · City of Kansas City building department, Hometriva methodology
Kansas City vs Missouri vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Kansas City
$1,260
Likely range $360 – $4,460
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Kansas City building departmentModeled estimate |
| electrical | City of Kansas City building departmentModeled estimate |
| mechanical | City of Kansas City building departmentModeled estimate |
| plumbing | City of Kansas City building departmentModeled estimate |
| zoning | City of Kansas City building departmentModeled estimate |
| fire | City of Kansas City building departmentModeled estimate |
Permit requirement in Kansas City
Usually no permit is required in Kansas City, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Kansas City building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$120Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
High62/100
Freeze-thaw cycling and a large pre-1970 housing stock make sewer laterals, foundations and window replacement recurring projects.
Nearby market comparison
What Kansas City homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Kansas City
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Kansas City drywall costs
Hometriva does not publish invented city prices. The Kansas City estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx0.974
Kansas City-area trade labor rates, weighted at 76% of this job.
- Material factorx0.989
Material and delivery pricing into Jackson County, weighted at 24%.
- Regulatory factorx1.035
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.979
Blended Kansas City adjustment specific to drywall repair.
- Permit component$0 – $120
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Kansas City carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Kansas City, MO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
- City of Kansas City building department
- Kansas City permit portal
- Missouri Division of Fire Safety
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.