Fence Installation cost in Boston, MA

Boston, MA · updated August 2026

$7,400

Typical local cost

$3,500 – $15,900

Typical range

per linear foot installed
$26 – $90

Installed, local pricing

Permit
Usually yes

$80 – $340 in fees

Typical timeline
1-3 days of work

1-3 days of work, 1-4 weeks including permitting

Calculate my fence cost

Boston runs +45% against the U.S. average · data confidence High · modeled estimate, not a quote

Most Boston homeowners pay around $7,400. The local adjustment for this trade is x1.448 — driven mainly by Suffolk County labor rates and 40% exposure to local code requirements.

Estimate your Boston job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Estimated total cost

$8,281 – $12,237

Installed, including gates and permit

Cost per linear foot
$42 – $62
Gate allowance
$1,058
Posts required (8 ft spacing)
26 posts

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
75 linear foot installed$2,000$6,800
100 linear foot installed$2,600$9,000
125 linear foot installed$3,300$11,300
175 linear foot installed$4,600$15,800
225 linear foot installed$5,900$20,300

Based on Boston pricing of $26–$90 per linear foot installed.

Cost by fence run

Fencing is priced per linear foot, then adjusted for height, gates, terrain and demolition of the old fence. Every row is priced against the Boston median.

ScopeWhat it includesTypical installed cost
50 linear feetShort side yard run, one walk gate$2,600$3,700
100 linear feetTypical single-side or partial enclosure$4,400$6,300
150 linear feetStandard back-yard enclosure$6,300$8,500
200 linear feetFull perimeter on a quarter-acre lot, two gates$8,100$11,100
300 linear feetLarge lot or corner lot, drive gate included$11,800$16,300
  • Height changes price more than length: a 6 ft privacy fence uses roughly a third more material per foot than a 4 ft one.
  • Gates are priced individually — a drive gate typically costs more than 20 feet of fence.
  • Corner lots and pool enclosures are where local rules bite: sight-triangle limits, setbacks and self-closing, self-latching pool-barrier hardware.
  • Sloped or rocky ground adds stepped panels or extra post depth, both billed as labor.

Basis: Each scope is priced as a multiple of the modeled Boston median for fence installation, so the scenarios, the size table and the calculator always agree. · Hometriva methodology

Cost by material

Installed cost in this market, with expected service life.

MaterialInstalled rangeLifespanMaintenance
Pressure-Treated Wood Fence$5,200 $7,8001020 yrsHigh
Vinyl Fence$8,100 $12,6002535 yrsVery low
Aluminum Fence$7,400 $11,8003050 yrsVery low
Chain Link Fence$3,100 $5,3001525 yrsLow
Composite Fence$10,400 $16,3002530 yrsLow

Where the money goes

Labor
$4,100
54% of median
Materials
$3,300
43% of median
Permit & fees
$210
3% of median

Boston project costs+45% vs U.S. average

Based on Suffolk County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Boston building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of work, 1-4 weeks including permitting

  5. 05

    Inspection

    Setback / location check in some jurisdictions, Final fence inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Boston labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$89–$116

Exterior crews in Suffolk County · +49% vs U.S. ($68/hr)

Typical crew

2 × 2.5 days

On-site time for a typical fence job here.

Labor in the price

$4,100

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Boston wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Suffolk County labor factor (x1.494). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Boston differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$1,375Material and delivery$525Code and inspection load$275Permit fees$50
Dollars of the Boston difference owned by each driver, versus the U.S. median for fence installation.
  • Trade labor rates+$1,375

    Suffolk County crews price 49% above the national average, and labor is 55% of this job.

  • Material and delivery+$525

    Materials are nationally traded, so they move less — but delivery into this market runs 23% over baseline.

  • Code and inspection load+$275

    Fence Installation carries 40% exposure to local code requirements, and this jurisdiction's review load indexes at x1.14.

  • Permit fees+$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Boston median against the U.S. median for this scope. · City of Boston building department, Hometriva methodology

Boston vs Massachusetts vs the U.S.

Boston$3,500$15,900Massachusetts average$3,100$14,400U.S. average$2,400$11,000
Modeled ranges for fence installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated fence installation in Boston

$7,610

Likely range $3,710$16,110

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Linear footage and number of gates
  • Material: chain link, wood, vinyl, aluminum or composite
  • Fence height (4 ft front yard versus 6 ft rear yard)
  • Post depth and concrete required for wind loads
  • Grading, tree roots and old fence removal

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Boston building departmentModeled estimate
electricalCity of Boston building departmentModeled estimate
mechanicalCity of Boston building departmentModeled estimate
plumbingCity of Boston building departmentModeled estimate
zoningCity of Boston building departmentModeled estimate
fireCity of Boston building departmentModeled estimate

Permit requirement in Boston

In most cases yes — Suffolk County and the City of Boston generally require a permit for fence installation. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.

Permitting authority
City of Boston building departmentModeled estimate
Permit fee
Estimated allowance $80$340Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Setback / location check in some jurisdictions
  2. Final fence inspection
Full Boston permit guide for fence installation

Local conditions that change this job

Only the exposures that materially affect fence installation.

Design wind speed exposure

Moderate58/100

Named-storm exposure

Moderate52/100

Humidity

High66/100

Massachusetts amends the base code statewide and Boston's Inspectional Services adds its own review, so permitted labor runs well above the national median.

Nearby market comparison

MarketLocal factorMedianPer linear foot installed
Boston (this page)x1.448$7,400$26$90
Providencex1.217$6,200$22$75.50
New Yorkx1.666$8,500$30$104
Philadelphiax1.204$6,100$21.50$74.50

What Boston homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Boston

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Boston fence costs

Hometriva does not publish invented city prices. The Boston estimate for fence installation is produced by this chain, and every input is stored separately:

  1. National baseline$5,100

    Typical U.S. cost for fence installation on a single-family home.

  2. Local labor factorx1.494

    Boston-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.226

    Material and delivery pricing into Suffolk County, weighted at 45%.

  4. Regulatory factorx1.136

    Local code, product-approval and inspection load, applied at 40% for this project type.

  5. Applied multiplierx1.448

    Blended Boston adjustment specific to fence installation.

  6. Permit component$80 – $340

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, fence installation in Boston carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for fence installation pricing in Boston, MA.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How tall can a fence be in Florida?

There is no single statewide fence height limit. Most Florida jurisdictions allow up to 6 feet in side and rear yards and limit front-yard fences to 3-4 feet, with a corner visibility triangle kept clear. Pool barriers have their own minimum of 4 feet under the Florida Building Code.

Do I need a survey to get a fence permit?

Most Florida building departments require a current property survey or a site plan drawn on a survey showing the proposed fence line, so the reviewer can confirm setbacks and that the fence is on your property.

Can I install my own fence?

Yes. Fencing is one of the more DIY-friendly exterior projects and homeowners can generally pull their own fence permit. You are still responsible for property line accuracy, HOA approval and pool barrier compliance.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages