Flat Roof Replacement cost in Des Moines, IA
Des Moines, IA · updated August 2026
$13,300
Typical local cost
$5,900 – $27,600
Typical range
- per sq ft of roof area
- $6 – $16
- Permit
- Yes
- Typical timeline
- 2-5 days of work
Installed, local pricing
$175 – $685 in fees
2-5 days of work, 2-6 weeks including permitting
Des Moines runs -1% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Des Moines homeowners pay around $13,300. The local adjustment for this trade is x0.987 — driven mainly by Polk County labor rates and 90% exposure to local code requirements.
Estimate your Des Moines job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Roofing squares needed
14.8
Includes 10% waste
- Roof area
- 1,344 sq ft
- Shingle bundles
- 45 bundles
- Underlayment rolls (4 sq)
- 4 rolls
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 700 sq ft of roof area | $4,200 – $11,200 |
| 1,000 sq ft of roof area | $6,000 – $16,000 |
| 1,200 sq ft of roof area | $7,200 – $19,200 |
| 1,600 sq ft of roof area | $9,600 – $25,600 |
| 2,100 sq ft of roof area | $12,600 – $33,600 |
Based on Des Moines pricing of $6–$16 per sq ft of roof area.
Cost by roof scope
Roof pricing moves on area, pitch, how many layers come off and what the deck looks like underneath. Every row is priced against the Des Moines median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Overlay on a simple ranch roof | Single layer, 4:12 pitch, no tear-off | $8,200 – $10,900 |
| Standard tear-off and replace | One layer removed, architectural shingle, walkable pitch | $11,300 – $15,300 |
| Two-layer tear-off | Extra removal and disposal, same footprint | $13,300 – $18,000 |
| Steep or cut-up roof | 8:12+ pitch, multiple valleys, dormers, staging | $16,600 – $22,600 |
| Replacement with deck repair | Partial resheathing found after tear-off | $15,300 – $21,300 |
- • Tear-off and disposal is priced per layer — quotes that omit a second layer are the most common source of change orders.
- • Decking is unknown until the old roof is off. Reputable quotes state a per-sheet resheathing price up front.
- • Pitch above 7:12 requires fall protection and slows the crew, which shows up as labor, not material.
Basis: Each scope is priced as a multiple of the modeled Des Moines median for flat roof replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Standing-Seam Metal Roof | $20,000 – $31,900 | 40–70 yrs | Very low |
| TPO Membrane | $11,300 – $16,600 | 18–25 yrs | Low |
Where the money goes
- Labor
- $7,300
- 53% of median
- Materials
- $6,000
- 44% of median
- Permit & fees
- $430
- 3% of median
Des Moines project costs-1% vs U.S. average
Based on Polk County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Des Moines building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 days of work, 2-6 weeks including permitting
05
Inspection
Dry-in inspection, In-progress attachment, Final roof inspection
06
Closeout
Final sign-off, warranty and documentation
Des Moines labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$57–$73
Exterior crews in Polk County · -5% vs U.S. ($68/hr)
Typical crew
3 × 4.5 days
On-site time for a typical flat roof job here.
Labor in the price
$7,300
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Des Moines wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Polk County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Des Moines differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$375
Polk County crews price 5% below the national average, and labor is 55% of this job.
Code and inspection load+$350
Flat Roof Replacement carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.
Material and delivery-$125
Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.
Basis: Decomposition of the modeled Des Moines median against the U.S. median for this scope. · City of Des Moines building department, Hometriva methodology
Des Moines vs Iowa vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated flat roof replacement in Des Moines
$13,730
Likely range $6,330 – $28,030
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Membrane type: modified bitumen, TPO or coating
- Tapered insulation to correct ponding
- Number of penetrations and curbs
- Tear-off layers
- Parapet and flashing detail work
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Des Moines building departmentModeled estimate |
| electrical | City of Des Moines building departmentModeled estimate |
| mechanical | City of Des Moines building departmentModeled estimate |
| plumbing | City of Des Moines building departmentModeled estimate |
| zoning | City of Des Moines building departmentModeled estimate |
| fire | City of Des Moines building departmentModeled estimate |
Permit requirement in Des Moines
Yes — a permit is required for flat roof replacement in Des Moines, IA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Des Moines building departmentModeled estimate
- Permit fee
- Estimated allowance $175–$685Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Dry-in inspection
- In-progress attachment
- Final roof inspection
Local conditions that change this job
Only the exposures that materially affect flat roof replacement.
Cooling load / heat exposure
High62/100
Annual rainfall
Moderate52/100
Named-storm exposure
High62/100
Solar irradiance
Moderate58/100
Deep frost line and derecho wind history change footing depth and roofing decisions relative to milder Midwest markets.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of roof area |
|---|---|---|---|
| Des Moines (this page) | x0.987 | $13,300 | $6 – $16 |
| Omaha | x0.976 | $13,200 | $6 – $15.50 |
| Minneapolis | x1.206 | $16,300 | $7 – $19.50 |
| Kansas City | x1.012 | $13,700 | $6 – $16 |
What Des Moines homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Des Moines
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Des Moines flat roof costs
Hometriva does not publish invented city prices. The Des Moines estimate for flat roof replacement is produced by this chain, and every input is stored separately:
- National baseline$13,500
Typical U.S. cost for flat roof replacement on a single-family home.
- Local labor factorx0.948
Des Moines-area trade labor rates, weighted at 55% of this job.
- Material factorx0.978
Material and delivery pricing into Polk County, weighted at 45%.
- Regulatory factorx1.029
Local code, product-approval and inspection load, applied at 90% for this project type.
- Applied multiplierx0.987
Blended Des Moines adjustment specific to flat roof replacement.
- Permit component$175 – $685
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, flat roof replacement in Des Moines carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for flat roof replacement pricing in Des Moines, IA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does a flat roof last in Florida?
Modified bitumen typically lasts 12 to 20 years in Florida, TPO 15 to 25 years, and silicone coating systems 10 to 15 years before recoating. Standing water shortens all of these.
Sources
Sources & verification
- City of Des Moines building department
- Des Moines permit portal
- Iowa Department of Public Safety
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.