Gutter Installation cost in Seattle, WA
Seattle, WA · updated August 2026
$2,800
Typical local cost
$1,100 – $8,200
Typical range
- per linear foot
- $7.50 – $28
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $160 in fees
1 day of work
Seattle runs +26% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Seattle homeowners pay around $2,800. The local adjustment for this trade is x1.263 — driven mainly by King County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $800 – $2,800 |
| 125 linear foot | $900 – $3,500 |
| 150 linear foot | $1,100 – $4,200 |
| 200 linear foot | $1,500 – $5,600 |
| 275 linear foot | $2,100 – $7,700 |
Based on Seattle pricing of $8–$28 per linear foot.
Where the money goes
- Labor
- $1,500
- 52% of median
- Materials
- $1,300
- 45% of median
- Permit & fees
- $80
- 3% of median
Seattle project costs+26% vs U.S. average
Based on King County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Seattle labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$80–$104
Exterior crews in King County · +34% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,500
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Seattle wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the King County labor factor (x1.338). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Seattle differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$400
King County crews price 34% above the national average, and labor is 55% of this job.
Material and delivery+$150
Materials are nationally traded, so they move less — but delivery into this market runs 15% over baseline.
Basis: Decomposition of the modeled Seattle median against the U.S. median for this scope. · City of Seattle building department, Hometriva methodology
Seattle vs Washington vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Seattle
$2,880
Likely range $1,180 – $8,280
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Seattle building departmentModeled estimate |
| electrical | City of Seattle building departmentModeled estimate |
| mechanical | City of Seattle building departmentModeled estimate |
| plumbing | City of Seattle building departmentModeled estimate |
| zoning | City of Seattle building departmentModeled estimate |
| fire | City of Seattle building departmentModeled estimate |
Permit requirement in Seattle
Usually no permit is required in Seattle, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Seattle building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$160Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
High78/100
Named-storm exposure
Low34/100
SDCI review timelines, seismic detailing and energy-code requirements add meaningful cost and schedule to structural and envelope work.
Nearby market comparison
What Seattle homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Seattle
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Seattle gutters costs
Hometriva does not publish invented city prices. The Seattle estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx1.338
Seattle-area trade labor rates, weighted at 55% of this job.
- Material factorx1.153
Material and delivery pricing into King County, weighted at 45%.
- Regulatory factorx1.128
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.263
Blended Seattle adjustment specific to gutter installation.
- Permit component$0 – $160
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Seattle carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Seattle, WA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do gutters need a permit in Florida?
Standard gutter installation is generally exempt from permitting. Underground drainage that discharges to a swale, street or neighboring property can trigger a stormwater or right-of-way permit.
Sources
Sources & verification
- City of Seattle building department
- Seattle permit portal
- Washington State Building Code Council
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.