Pool Installation cost in Phoenix, AZ
Phoenix, AZ · updated August 2026
$64,900
Typical local cost
$39,800 – $120,400
Typical range
- per in-ground gunite pool
- $39,800 – $120,400
- Permit
- Yes
- Typical timeline
- 8-16 weeks from permit to plaster
Installed, local pricing
$420 – $1,890 in fees
8-16 weeks from permit to plaster
Phoenix runs +5% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Phoenix homeowners pay around $64,900. The local adjustment for this trade is x1.047 — driven mainly by Maricopa County labor rates and 70% exposure to local code requirements.
Estimate your Phoenix job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$80,760 – $118,875
Turnkey, including permit allowance
- Pool surface area
- 450 sq ft
- Shell & excavation
- $47,250
- Decking
- $8,400
- Screen enclosure
- $23,100
- Approx. water volumeAt 5.5 ft average depth
- 18,513 gallons
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 in-ground gunite pool | $39,800 – $120,400 |
| 1 in-ground gunite pool | $39,800 – $120,400 |
| 1 in-ground gunite pool | $39,800 – $120,400 |
| 1 in-ground gunite pool | $39,800 – $120,400 |
| 1 in-ground gunite pool | $39,800 – $120,400 |
Based on Phoenix pricing of $39,800–$120,400 per in-ground gunite pool.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Fiberglass Pool | $44,100 – $68,100 | 25–40 yrs | Low |
| Gunite / Concrete Pool | $61,700 – $110,300 | 50–75 yrs | High |
| Vinyl Liner Pool | $35,700 – $58,400 | 20–30 yrs | Moderate |
Where the money goes
- Labor
- $37,600
- 57% of median
- Materials
- $27,300
- 41% of median
- Permit & fees
- $1,155
- 2% of median
Phoenix project costs+5% vs U.S. average
Based on Maricopa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Phoenix building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
8-16 weeks from permit to plaster
05
Inspection
Steel / pre-gunite, Plumbing pressure test, Electrical bonding, Deck and barrier, Final pool and safety inspection
06
Closeout
Final sign-off, warranty and documentation
Phoenix labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$73
Outdoor crews in Maricopa County · +3% vs U.S. ($62/hr)
Typical crew
4 × 18.5 days
On-site time for a typical pool job here.
Labor in the price
$37,600
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Phoenix wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Maricopa County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Phoenix differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$1,650
Pool Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Trade labor rates+$925
Maricopa County crews price 3% above the national average, and labor is 58% of this job.
Material and delivery+$275
Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline.
Permit fees+$50
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Phoenix median against the U.S. median for this scope. · City of Phoenix building department, Hometriva methodology
Phoenix vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool installation in Phoenix
$66,055
Likely range $40,955 – $121,555
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Pool size, depth and shape
- Gunite versus fiberglass versus vinyl liner
- Screen enclosure or cage
- Deck material and square footage
- Heater, saltwater system, spa and water features
- Required safety barrier and alarms
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Phoenix building departmentModeled estimate |
| electrical | City of Phoenix building departmentModeled estimate |
| mechanical | City of Phoenix building departmentModeled estimate |
| plumbing | City of Phoenix building departmentModeled estimate |
| zoning | City of Phoenix building departmentModeled estimate |
| fire | City of Phoenix building departmentModeled estimate |
Permit requirement in Phoenix
Yes — a permit is required for pool installation in Phoenix, AZ. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Phoenix building departmentModeled estimate
- Permit fee
- Estimated allowance $420–$1,890Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Steel / pre-gunite
- Plumbing pressure test
- Electrical bonding
- Deck and barrier
- Final pool and safety inspection
Local conditions that change this job
Only the exposures that materially affect pool installation.
Cooling load / heat exposure
Severe96/100
Freeze-thaw cycles
Minimal12/100
Solar irradiance
Severe96/100
Extreme cooling load and intense UV shorten roof and exterior finish life; Phoenix Planning & Development permits inside city limits while unincorporated Maricopa County work goes to the county.
Nearby market comparison
| Market | Local factor | Median | Per in-ground gunite pool |
|---|---|---|---|
| Phoenix (this page) | x1.047 | $64,900 | $39,800 – $120,400 |
| Tucson | x0.953 | $59,100 | $36,200 – $109,600 |
| Las Vegas | x1.068 | $66,200 | $40,600 – $122,800 |
| Albuquerque | x0.940 | $58,300 | $35,700 – $108,100 |
What Phoenix homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Phoenix
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Phoenix pool costs
Hometriva does not publish invented city prices. The Phoenix estimate for pool installation is produced by this chain, and every input is stored separately:
- National baseline$62,000
Typical U.S. cost for pool installation on a single-family home.
- Local labor factorx1.026
Phoenix-area trade labor rates, weighted at 58% of this job.
- Material factorx1.011
Material and delivery pricing into Maricopa County, weighted at 42%.
- Regulatory factorx1.038
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx1.047
Blended Phoenix adjustment specific to pool installation.
- Permit component$420 – $1,890
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool installation in Phoenix carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool installation pricing in Phoenix, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to build a pool in Florida?
Yes. Every Florida jurisdiction requires a building permit with engineered plans for an in-ground pool, plus electrical and plumbing permits, and the pool cannot pass final inspection without a compliant safety barrier.
What safety barrier does Florida require?
The Residential Swimming Pool Safety Act requires at least one approved feature: a 4-foot barrier fence meeting code, an approved safety pool cover, self-closing and self-latching exit alarms on doors and windows with direct access, or an approved door alarm system.
How long does pool construction take?
Typical Florida in-ground pool construction runs 8-16 weeks from permit issuance, with inspection scheduling and weather as the two biggest sources of delay.
Sources
Sources & verification
- City of Phoenix building department
- Phoenix permit portal
- Arizona Registrar of Contractors
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.