Stucco Repair cost in Atlanta, GA
Atlanta, GA · updated August 2026
$4,200
Typical local cost
$900 – $16,000
Typical range
- per sq ft repaired
- $7 – $22
- Permit
- It depends
- Typical timeline
- 2-6 days of work plus cure time
Installed, local pricing
$95 – $345 in fees
2-6 days of work plus cure time, 1-4 weeks with permitting
Atlanta runs 0% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Atlanta homeowners pay around $4,200. The local adjustment for this trade is x1.002 — driven mainly by Fulton County labor rates and 20% exposure to local code requirements.
Estimate your Atlanta job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 175 sq ft repaired | $1,200 – $3,900 |
| 225 sq ft repaired | $1,600 – $5,000 |
| 300 sq ft repaired | $2,100 – $6,600 |
| 375 sq ft repaired | $2,600 – $8,300 |
| 500 sq ft repaired | $3,500 – $11,000 |
Based on Atlanta pricing of $7–$22 per sq ft repaired.
Where the money goes
- Labor
- $2,300
- 52% of median
- Materials
- $1,900
- 43% of median
- Permit & fees
- $220
- 5% of median
Atlanta project costs+0% vs U.S. average
Based on Fulton County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Atlanta building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-6 days of work plus cure time, 1-4 weeks with permitting
05
Inspection
Lath / wire inspection when re-lathing, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Atlanta labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$59–$77
Exterior crews in Fulton County · -1% vs U.S. ($68/hr)
Typical crew
2 × 2 days
On-site time for a typical stucco job here.
Labor in the price
$2,300
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Atlanta wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Fulton County labor factor (x0.987). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Atlanta differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$50
Stucco Repair carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Trade labor rates-$25
Fulton County crews price 1% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Atlanta median against the U.S. median for this scope. · City of Atlanta building department, Hometriva methodology
Atlanta vs Georgia vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated stucco repair in Atlanta
$4,420
Likely range $1,120 – $16,220
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Extent of delamination behind the visible crack
- Whether lath and weather barrier need replacement
- Two-story access and scaffolding
- Color matching versus full re-coat
- Underlying water intrusion repairs
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Atlanta building departmentModeled estimate |
| electrical | City of Atlanta building departmentModeled estimate |
| mechanical | City of Atlanta building departmentModeled estimate |
| plumbing | City of Atlanta building departmentModeled estimate |
| zoning | City of Atlanta building departmentModeled estimate |
| fire | City of Atlanta building departmentModeled estimate |
Permit requirement in Atlanta
It depends on scope. Like-for-like cosmetic work in Atlanta is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Atlanta building departmentModeled estimate
- Permit fee
- Estimated allowance $95–$345Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Lath / wire inspection when re-lathing
- Final inspection
Local conditions that change this job
Only the exposures that materially affect stucco repair.
Humidity
High74/100
Annual rainfall
High66/100
Coastal / salt-air exposure
Minimal6/100
Much of metro Atlanta sits outside the city limits, so the correct permit office is frequently a county or a smaller incorporated city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft repaired |
|---|---|---|---|
| Atlanta (this page) | x1.002 | $4,200 | $7 – $22 |
| Charlotte | x0.979 | $4,100 | $7 – $21.50 |
| Birmingham | x0.906 | $3,800 | $6.50 – $20 |
| Nashville | x1.011 | $4,200 | $7 – $22 |
What Atlanta homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Atlanta
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Atlanta stucco costs
Hometriva does not publish invented city prices. The Atlanta estimate for stucco repair is produced by this chain, and every input is stored separately:
- National baseline$4,200
Typical U.S. cost for stucco repair on a single-family home.
- Local labor factorx0.987
Atlanta-area trade labor rates, weighted at 55% of this job.
- Material factorx0.997
Material and delivery pricing into Fulton County, weighted at 45%.
- Regulatory factorx1.051
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx1.002
Blended Atlanta adjustment specific to stucco repair.
- Permit component$95 – $345
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, stucco repair in Atlanta carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for stucco repair pricing in Atlanta, GA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for stucco repair in Florida?
Small cosmetic patches typically do not require a permit, but most jurisdictions require one once the repair exposes lath, exceeds a set square footage, or involves replacing the weather-resistive barrier.
Sources
Sources & verification
- City of Atlanta building department
- Atlanta permit portal
- Georgia Department of Community Affairs
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.