Window Replacement cost in Albuquerque, NM

Albuquerque, NM · updated August 2026

$14,500

Typical local cost

$7,100 – $32,300

Typical range

per window installed
$600 – $1,800

Installed, local pricing

Permit
Yes

$115 – $530 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Calculate my windows cost

Albuquerque runs -5% against the U.S. average · data confidence High · modeled estimate, not a quote

Most Albuquerque homeowners pay around $14,500. The local adjustment for this trade is x0.951 — driven mainly by Bernalillo County labor rates and 85% exposure to local code requirements.

Estimate your Albuquerque job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Square footage

180 sq ft

With waste allowance
198 sq ft
Square yards
20
Perimeter (per area)
54 ft
Square meters
16.72

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
7 window installed$4,200$12,600
10 window installed$6,000$18,000
12 window installed$7,200$21,600
15 window installed$9,000$27,000
20 window installed$12,000$36,000

Based on Albuquerque pricing of $600–$1,800 per window installed.

Cost by window count and install type

Windows are priced per opening. Frame material and whether the crew does a retrofit (insert) or full-frame install drive the spread. Every row is priced against the Albuquerque median.

ScopeWhat it includesTypical installed cost
5 windows — retrofitInsert into sound existing frames, vinyl$5,100$7,300
10 windows — retrofitTypical partial-home replacement$10,200$13,800
15 windows — mixedMost of a single-family home$14,500$19,600
20 windows — full-frameWhole-home, frames and trim replaced$19,600$26,800
10 windows — impact / structuralImpact-rated or egress-corrected openings$16,700$23,200
  • Retrofit inserts keep the existing frame and cost less; full-frame replacement is required once the frame or sill is rotted or the opening is being resized.
  • Rough-opening changes and egress corrections turn a window job into a permitted structural job.
  • Frame material sets the floor: vinyl is the value option, fiberglass and clad-wood carry a premium, aluminum is mostly a warm-climate product.
  • In wind-borne debris regions the glazing package, not the frame, is the biggest single line item.

Basis: Each scope is priced as a multiple of the modeled Albuquerque median for window replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology

Cost by material

Installed cost in this market, with expected service life.

MaterialInstalled rangeLifespanMaintenance
Vinyl Windows$9,900 $15,2002030 yrsVery low
Aluminum Impact Windows$16,700 $27,6003040 yrsLow
Fiberglass Windows$16,000 $24,7003050 yrsLow

Where the money goes

Labor
$5,800
39% of median
Materials
$8,700
59% of median
Permit & fees
$325
2% of median

Albuquerque project costs-5% vs U.S. average

Based on Bernalillo County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Albuquerque building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Window buck / installation inspection, Final building inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Albuquerque labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$54–$70

Exterior crews in Bernalillo County · -9% vs U.S. ($68/hr)

Typical crew

3 × 4 days

On-site time for a typical windows job here.

Labor in the price

$5,800

40% of the median — the rest is material, disposal and permit.

Because labor is 40% of this job, Albuquerque wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Bernalillo County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Albuquerque differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$550Material and delivery$350Code and inspection load$175
Dollars of the Albuquerque difference owned by each driver, versus the U.S. median for window replacement.
  • Trade labor rates-$550

    Bernalillo County crews price 9% below the national average, and labor is 40% of this job.

  • Material and delivery-$350

    Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.

  • Code and inspection load+$175

    Window Replacement carries 85% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.

Basis: Decomposition of the modeled Albuquerque median against the U.S. median for this scope. · City of Albuquerque building department, Hometriva methodology

Albuquerque vs New Mexico vs the U.S.

Albuquerque$7,100$32,300New Mexico average$7,200$32,800U.S. average$7,500$34,000
Modeled ranges for window replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated window replacement in Albuquerque

$14,825

Likely range $7,425$32,625

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Impact-rated versus standard glass
  • Frame material: vinyl, aluminum or fiberglass
  • Design pressure required for your wind zone
  • Stucco, block or frame wall repair around the opening

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Albuquerque building departmentModeled estimate
electricalCity of Albuquerque building departmentModeled estimate
mechanicalCity of Albuquerque building departmentModeled estimate
plumbingCity of Albuquerque building departmentModeled estimate
zoningCity of Albuquerque building departmentModeled estimate
fireCity of Albuquerque building departmentModeled estimate

Permit requirement in Albuquerque

Yes — a permit is required for window replacement in Albuquerque, NM. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Albuquerque building departmentModeled estimate
Permit fee
Estimated allowance $115$530Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Window buck / installation inspection
  2. Final building inspection
Full Albuquerque permit guide for window replacement

Local conditions that change this job

Only the exposures that materially affect window replacement.

Design wind speed exposure

Moderate40/100

Named-storm exposure

Low22/100

Cooling load / heat exposure

Severe96/100

Solar irradiance

Severe96/100

High-desert sun and low humidity favor evaporative cooling and flat-roof coatings that behave very differently from humid-climate systems.

Owner-occupied homes

60%

Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.

Households in market

224,110

Approximate household count in Albuquerque, used to size the contractor pool for this trade.

Permit activity index

x0.96

Relative permit volume and fee load versus the national baseline.

Nearby market comparison

MarketLocal factorMedianPer window installed
Albuquerque (this page)x0.951$14,500$600$1,800
Phoenixx1.050$16,000$700$2,000
Denverx1.172$17,800$750$2,250
Tucsonx0.964$14,700$650$1,850

What Albuquerque homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Albuquerque

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Albuquerque windows costs

Hometriva does not publish invented city prices. The Albuquerque estimate for window replacement is produced by this chain, and every input is stored separately:

  1. National baseline$15,200

    Typical U.S. cost for window replacement on a single-family home.

  2. Local labor factorx0.909

    Albuquerque-area trade labor rates, weighted at 40% of this job.

  3. Material factorx0.962

    Material and delivery pricing into Bernalillo County, weighted at 60%.

  4. Regulatory factorx1.013

    Local code, product-approval and inspection load, applied at 85% for this project type.

  5. Applied multiplierx0.951

    Blended Albuquerque adjustment specific to window replacement.

  6. Permit component$115 – $530

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, window replacement in Albuquerque carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for window replacement pricing in Albuquerque, NM.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit to replace windows in Florida?

Yes. Window replacement is a permitted alteration statewide because the opening protection and attachment must meet the wind-load requirements of the Florida Building Code. Product approval numbers are submitted with the application.

Are impact windows worth it in Florida?

Impact windows typically cost 40-70% more than standard units but can replace shutters entirely and often qualify for a wind mitigation insurance credit. In HVHZ counties, opening protection is required, so the practical choice is impact glass or approved shutters.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages