New Jersey pricing
Entry Door Replacement Cost Calculator — New Jersey
Price a front door replacement by material, frame work and hardware. Every figure below is already adjusted for New Jersey labor and material pricing.
Model reviewed August 2026
Does entry door cost cost more in New Jersey?
+21% versus the national baseline
Installed prices in New Jersey run about 21% above the national baseline. Permit fees are about 25% higher than the national average. Homeowner permits allowed on owner-occupied one- and two-family homes.
The UCC's subcode structure means one project can require separate building, electrical, plumbing and fire subcode permits, each with its own fee and inspector.
Compare with the national average entry door cost calculator.
Estimated total cost
$3,514 – $4,991
- Cost per door
- $3,514 – $4,991
- Door and sidelights
- $2,541
- Labor
- $605
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in New Jersey
| Local cost indexAbove the national baseline | 1.21x national |
|---|---|
| Permit fee index | 1.25x national |
| Code basisStatewide code applies | New Jersey Uniform Construction Code, based on the IRC |
| Owner-builder posture | Homeowner permits allowed on owner-occupied one- and two-family homes |
| Largest markets | Newark, Jersey City, Paterson, Trenton |
The formula
Cost = doors x (material cost + sidelights) + frame work + hardware + labor
Slab-only swaps are cheapest. Replacing the jamb, threshold and weatherstripping (a pre-hung unit) costs more but fixes air leaks and sticking doors.
Covered markets in New Jersey
City-level cost and permit pages with local building department links.
Frequently asked questions
How much does it cost to replace a front door?
Typical installed cost is $1,200 to $4,000 in 2026 depending on material and whether sidelights are included.
Do I need a permit to replace an entry door?
A like-for-like swap usually does not need a permit, but enlarging the opening or replacing an exterior door in a coastal wind zone typically does.
Sources
Sources & verification
- New Jersey Division of Codes and Standards
- DASMA garage door and operator standards
- International Residential Code — doors and egress (R311)
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.