Alabama pricing
Gutter Replacement Cost Calculator — Alabama
Price new gutters by linear footage, material and downspout count. Every figure below is already adjusted for Alabama labor and material pricing.
Model reviewed August 2026
Does gutter cost cost more in Alabama?
-10% versus the national baseline
Installed prices in Alabama run about 10% below the national baseline. Permit fees are about 15% lower than the national average. Homeowners may generally permit work on a home they own and occupy, subject to local rules.
Coastal Baldwin and Mobile counties enforce wind-borne debris requirements that inland Alabama does not, which changes roofing and window pricing sharply within one state.
Compare with the national average gutter cost calculator.
Estimated total cost
$1,858 – $2,640
- Cost per linear foot
- $12
- Gutter runs
- $1,458
- Downspouts
- $459
- Removal and disposal
- $194
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in Alabama
| Local cost indexBelow the national baseline | 0.90x national |
|---|---|
| Permit fee index | 0.85x national |
| Code basisAdopted locally | Local adoption of the IRC; statewide code applies to state-funded and manufactured housing |
| Owner-builder posture | Homeowners may generally permit work on a home they own and occupy, subject to local rules |
| Largest markets | Birmingham, Huntsville, Montgomery, Mobile |
The formula
Cost = linear feet x material rate x height multiplier + downspouts x unit cost + removal
Measure the roof edge, not the roof area. A rectangular home usually needs gutters along the two eave sides only, not the gable ends.
Covered markets in Alabama
City-level cost and permit pages with local building department links.
Frequently asked questions
How much do gutters cost per foot?
Seamless aluminum runs $8 to $14 per linear foot installed in 2026. Copper runs $28 to $45.
How many downspouts do I need?
One downspout per 30 to 40 feet of gutter run is the usual rule, with more added on long runs or steep roofs that shed high volume.
Sources
Sources & verification
- Alabama Building Commission
- International Residential Code — decks and exterior structures (R507)
- ICPI segmental paving installation guidance
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.