Maine pricing
Gutter Replacement Cost Calculator — Maine
Price new gutters by linear footage, material and downspout count. Every figure below is already adjusted for Maine labor and material pricing.
Model reviewed August 2026
Does gutter cost cost more in Maine?
+6% versus the national baseline
Installed prices in Maine run about 6% above the national baseline. Permit fees are about 10% lower than the national average. Owner-builder permits common.
Towns under 4,000 residents are not required to enforce MUBEC, so whether your project needs a permit at all can depend on town population.
Compare with the national average gutter cost calculator.
Estimated total cost
$2,188 – $3,109
- Cost per linear foot
- $14
- Gutter runs
- $1,717
- Downspouts
- $541
- Removal and disposal
- $229
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in Maine
| Local cost indexAbove the national baseline | 1.06x national |
|---|---|
| Permit fee index | 0.90x national |
| Code basisStatewide code applies | Maine Uniform Building and Energy Code (MUBEC) in towns over 4,000 residents |
| Owner-builder posture | Owner-builder permits common |
| Largest markets | Portland, Lewiston, Bangor |
The formula
Cost = linear feet x material rate x height multiplier + downspouts x unit cost + removal
Measure the roof edge, not the roof area. A rectangular home usually needs gutters along the two eave sides only, not the gable ends.
Covered markets in Maine
City-level cost and permit pages with local building department links.
Frequently asked questions
How much do gutters cost per foot?
Seamless aluminum runs $8 to $14 per linear foot installed in 2026. Copper runs $28 to $45.
How many downspouts do I need?
One downspout per 30 to 40 feet of gutter run is the usual rule, with more added on long runs or steep roofs that shed high volume.
Sources
Sources & verification
- Maine Bureau of Building Codes and Standards
- International Residential Code — decks and exterior structures (R507)
- ICPI segmental paving installation guidance
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.