Oregon pricing
Gutter Replacement Cost Calculator — Oregon
Price new gutters by linear footage, material and downspout count. Every figure below is already adjusted for Oregon labor and material pricing.
Model reviewed August 2026
Does gutter cost cost more in Oregon?
+14% versus the national baseline
Installed prices in Oregon run about 14% above the national baseline. Permit fees are about 15% higher than the national average. Homeowner permits allowed on owner-occupied property.
Statewide seismic detailing plus Portland's stormwater and tree-preservation review add steps that similar-cost states do not require.
Compare with the national average gutter cost calculator.
Estimated total cost
$2,353 – $3,344
- Cost per linear foot
- $15
- Gutter runs
- $1,847
- Downspouts
- $581
- Removal and disposal
- $246
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in Oregon
| Local cost indexAbove the national baseline | 1.14x national |
|---|---|
| Permit fee index | 1.15x national |
| Code basisStatewide code applies | Oregon Residential Specialty Code, based on the IRC |
| Owner-builder posture | Homeowner permits allowed on owner-occupied property |
| Largest markets | Portland, Salem, Eugene, Bend |
The formula
Cost = linear feet x material rate x height multiplier + downspouts x unit cost + removal
Measure the roof edge, not the roof area. A rectangular home usually needs gutters along the two eave sides only, not the gable ends.
Covered markets in Oregon
City-level cost and permit pages with local building department links.
Frequently asked questions
How much do gutters cost per foot?
Seamless aluminum runs $8 to $14 per linear foot installed in 2026. Copper runs $28 to $45.
How many downspouts do I need?
One downspout per 30 to 40 feet of gutter run is the usual rule, with more added on long runs or steep roofs that shed high volume.
Sources
Sources & verification
- Oregon Building Codes Division
- International Residential Code — decks and exterior structures (R507)
- ICPI segmental paving installation guidance
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.