Mississippi pricing
Pool Resurfacing Cost Calculator — Mississippi
Estimate pool resurfacing cost by surface area and finish type. Every figure below is already adjusted for Mississippi labor and material pricing.
Model reviewed August 2026
Does pool resurfacing cost cost more in Mississippi?
-15% versus the national baseline
Installed prices in Mississippi run about 15% below the national baseline. Permit fees are about 20% lower than the national average. Homeowner permits widely allowed.
The six coastal counties carry wind-borne debris and elevation rules; much of the interior has minimal residential permitting, which is the biggest single cost split in the state.
Compare with the national average pool resurfacing cost calculator.
Estimated total cost
$11,663 – $16,567
- Interior surface area
- 992 sq ft
- Cost per square foot
- $14
- Finish material and labor
- $9,275
- Tile band
- $1,870
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in Mississippi
| Local cost indexBelow the national baseline | 0.85x national |
|---|---|
| Permit fee index | 0.80x national |
| Code basisAdopted locally | Local adoption of the IRC; coastal counties enforce wind requirements |
| Owner-builder posture | Homeowner permits widely allowed |
| Largest markets | Jackson, Gulfport, Hattiesburg |
The formula
Surface area = length x width + perimeter x average depth; Cost = area x finish rate + tile + prep
Standard plaster lasts 7 to 10 years; pebble and quartz finishes last 15 to 20 and cost roughly twice as much.
Covered markets in Mississippi
City-level cost and permit pages with local building department links.
Frequently asked questions
How much does it cost to resurface a pool?
Plaster resurfacing typically runs $6,000 to $9,000 for an average pool in 2026; pebble and premium aggregate finishes run $9,000 to $16,000.
How often does a pool need resurfacing?
Plaster every 7 to 10 years, pebble every 15 to 20. Rough patches, staining that will not brush out and exposed gunite are the signals.
Sources
Sources & verification
- Mississippi State Fire Marshal
- International Residential Code — decks and exterior structures (R507)
- ICPI segmental paving installation guidance
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.