AC Replacement cost in Camden, NJ

Camden, NJ · updated August 2026

$11,300

Typical local cost

$6,600 – $19,700

Typical range

per ton of cooling capacity
$2,050 – $4,050

Installed, local pricing

Permit
Yes

$115 – $400 in fees

Typical timeline
1 day of work

1 day of work, 1-3 weeks including permit and inspection

Calculate my ac cost

Camden runs +27% against the U.S. average · data confidence High · modeled estimate, not a quote

The modeled midpoint for Camden is $11,300. The local adjustment for this trade is x1.272 — driven mainly by Camden County labor rates and 55% exposure to local code requirements.

Estimate your Camden job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Recommended size

5 tons

Round to the nearest half ton

Cooling load
61,000 BTU/hr
Typical equipment costInstalled, 14-17 SEER2
$10,812 – $20,352
Rule-of-thumb check
400 sq ft per ton

Priced for Camden (local adjustment x1.272).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
2 ton of cooling capacity$4,100$8,100
3 ton of cooling capacity$6,200$12,200
4 ton of cooling capacity$8,200$16,200
5 ton of cooling capacity$10,300$20,300
6 ton of cooling capacity$12,300$24,300

Based on Camden pricing of $2,050–$4,050 per ton of cooling capacity.

Cost by system scenario

Equipment type, tonnage and whether the ductwork or electrical has to change move HVAC pricing more than brand does. Every row is priced against the Camden median.

ScopeWhat it includesTypical installed cost
Straight equipment swapSame tonnage, existing ducts and pad reused$7,900$10,700
Higher-efficiency replacementUpgraded SEER2 tier, same configuration$10,700$14,100
Heat pump conversionElectric heat pump replacing AC plus furnace or strips$12,400$17,000
Replacement with duct repairSealing, resizing or replacing failed duct runs$14,100$19,200
Ductless multi-zoneThree to four indoor heads, new line sets$13,600$19,200
  • Correct sizing comes from a load calculation, not from matching the old unit's tonnage — an oversized system short-cycles and costs more to run.
  • Line-set replacement and electrical disconnect work are common add-ons on a swap that was quoted as straightforward.
  • Refrigerant transition rules mean older-refrigerant equipment is no longer a like-for-like replacement in most markets.

Basis: Each scope is priced as a multiple of the modeled Camden median for ac replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology

Cost by material

Installed cost in this market, with expected service life.

MaterialInstalled rangeLifespanMaintenance
Heat Pump System$10,200 $15,8001218 yrsModerate
Central AC + Gas Furnace$9,000 $14,7001520 yrsModerate

Where the money goes

Labor
$5,100
44% of median
Materials
$6,200
54% of median
Permit & fees
$260
2% of median

Camden project costs+27% vs U.S. average

Based on Camden County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Camden building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1 day of work, 1-3 weeks including permit and inspection

  5. 05

    Inspection

    Mechanical rough / equipment set, Electrical disconnect, Final mechanical inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Camden labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$106–$138

HVAC crews in Camden County · +27% vs U.S. ($95/hr)

Typical crew

3 × 2 days

On-site time for a typical ac job here.

Labor in the price

$5,100

45% of the median — the rest is material, disposal and permit.

Because labor is 45% of this job, Camden wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national hvac crew rates adjusted by the Camden County labor factor (x1.273). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Camden differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$1,100Material and delivery$650Code and inspection load$575Permit fees$50
Dollars of the Camden difference owned by each driver, versus the U.S. median for ac replacement.
  • Trade labor rates+$1,100

    Camden County crews price 27% above the national average, and labor is 45% of this job.

  • Material and delivery+$650

    Materials are nationally traded, so they move less — but delivery into this market runs 13% over baseline.

  • Code and inspection load+$575

    AC Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.11.

  • Permit fees+$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Camden median against the U.S. median for this scope. · City of Camden building department, Hometriva methodology

Camden vs New Jersey vs the U.S.

Camden$6,600$19,700New Jersey average$6,600$19,700U.S. average$5,200$15,500
Modeled ranges for ac replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated ac replacement in Camden

$11,560

Likely range $6,860$19,960

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • System size in tons and SEER2 efficiency rating
  • Heat pump versus straight cool with electric heat
  • Air handler location (attic, closet, garage)
  • Duct condition and any required duct replacement
  • Electrical upgrades and new disconnect

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Camden building departmentModeled estimate
electricalCity of Camden building departmentModeled estimate
mechanicalCity of Camden building departmentModeled estimate
plumbingCity of Camden building departmentModeled estimate
zoningCity of Camden building departmentModeled estimate
fireCity of Camden building departmentModeled estimate

Permit requirement in Camden

Yes — a permit is required for ac replacement in Camden, NJ. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Camden building departmentModeled estimate
Permit fee
Estimated allowance $115$400Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Mechanical rough / equipment set
  2. Electrical disconnect
  3. Final mechanical inspection
Full Camden permit guide for ac replacement

Local conditions that change this job

Only the exposures that materially affect ac replacement.

Cooling load / heat exposure

Severe82/100

Humidity

Severe84/100

Solar irradiance

Severe82/100

Camden sits in Camden County, New Jersey. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer ton of cooling capacity
Camden (this page)x1.272$11,300$2,050$4,050
Philadelphiax1.209$10,800$1,950$3,850
Wilmingtonx1.069$9,500$1,700$3,400
Trentonx1.272$11,300$2,050$4,050

What Camden homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Camden

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Camden ac costs

Hometriva does not publish invented city prices. The Camden estimate for ac replacement is produced by this chain, and every input is stored separately:

  1. National baseline$8,900

    Typical U.S. cost for ac replacement on a single-family home.

  2. Local labor factorx1.273

    Camden-area trade labor rates, weighted at 45% of this job.

  3. Material factorx1.133

    Material and delivery pricing into Camden County, weighted at 55%.

  4. Regulatory factorx1.115

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx1.272

    Blended Camden adjustment specific to ac replacement.

  6. Permit component$115 – $400

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, ac replacement in Camden carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ac replacement pricing in Camden, NJ.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for ac replacement in Camden, NJ?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does ac replacement take?

1 day of work, 1-3 weeks including permit and inspection. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are system size in tons and seer2 efficiency rating; heat pump versus straight cool with electric heat; air handler location (attic, closet, garage).

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages