AC Replacement cost in Tulsa, OK
Tulsa, OK · updated August 2026
$8,300
Typical local cost
$4,900 – $14,500
Typical range
- per ton of cooling capacity
- $1,500 – $3,000
- Permit
- Yes
- Typical timeline
- 1 day of work
Installed, local pricing
$80 – $285 in fees
1 day of work, 1-3 weeks including permit and inspection
Tulsa runs -7% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Tulsa is $8,300. The local adjustment for this trade is x0.933 — driven mainly by Tulsa County labor rates and 55% exposure to local code requirements.
Estimate your Tulsa job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Recommended size
5 tons
Round to the nearest half ton
- Cooling load
- 61,000 BTU/hr
- Typical equipment costInstalled, 14-17 SEER2
- $7,931 – $14,928
- Rule-of-thumb check
- 400 sq ft per ton
Priced for Tulsa (local adjustment x0.933).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 2 ton of cooling capacity | $3,000 – $6,000 |
| 3 ton of cooling capacity | $4,500 – $9,000 |
| 4 ton of cooling capacity | $6,000 – $12,000 |
| 5 ton of cooling capacity | $7,500 – $15,000 |
| 6 ton of cooling capacity | $9,000 – $18,000 |
Based on Tulsa pricing of $1,500–$3,000 per ton of cooling capacity.
Cost by system scenario
Equipment type, tonnage and whether the ductwork or electrical has to change move HVAC pricing more than brand does. Every row is priced against the Tulsa median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Straight equipment swap | Same tonnage, existing ducts and pad reused | $5,800 – $7,900 |
| Higher-efficiency replacement | Upgraded SEER2 tier, same configuration | $7,900 – $10,400 |
| Heat pump conversion | Electric heat pump replacing AC plus furnace or strips | $9,100 – $12,500 |
| Replacement with duct repair | Sealing, resizing or replacing failed duct runs | $10,400 – $14,100 |
| Ductless multi-zone | Three to four indoor heads, new line sets | $10,000 – $14,100 |
- • Correct sizing comes from a load calculation, not from matching the old unit's tonnage — an oversized system short-cycles and costs more to run.
- • Line-set replacement and electrical disconnect work are common add-ons on a swap that was quoted as straightforward.
- • Refrigerant transition rules mean older-refrigerant equipment is no longer a like-for-like replacement in most markets.
Basis: Each scope is priced as a multiple of the modeled Tulsa median for ac replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Heat Pump System | $7,500 – $11,600 | 12–18 yrs | Moderate |
| Central AC + Gas Furnace | $6,600 – $10,800 | 15–20 yrs | Moderate |
Where the money goes
- Labor
- $3,700
- 44% of median
- Materials
- $4,600
- 54% of median
- Permit & fees
- $185
- 2% of median
Tulsa project costs-7% vs U.S. average
Based on Tulsa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Tulsa Development Services
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work, 1-3 weeks including permit and inspection
05
Inspection
Mechanical rough / equipment set, Electrical disconnect, Final mechanical inspection
06
Closeout
Final sign-off, warranty and documentation
Tulsa labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$74–$96
HVAC crews in Tulsa County · -12% vs U.S. ($95/hr)
Typical crew
3 × 2 days
On-site time for a typical ac job here.
Labor in the price
$3,700
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Tulsa wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national hvac crew rates adjusted by the Tulsa County labor factor (x0.883). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Tulsa differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$475
Tulsa County crews price 12% below the national average, and labor is 45% of this job.
Material and delivery-$175
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Code and inspection load+$50
AC Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Basis: Decomposition of the modeled Tulsa median against the U.S. median for this scope. · City of Tulsa Development Services, Hometriva methodology
Tulsa vs Oklahoma vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated ac replacement in Tulsa
$8,485
Likely range $5,085 – $14,685
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- System size in tons and SEER2 efficiency rating
- Heat pump versus straight cool with electric heat
- Air handler location (attic, closet, garage)
- Duct condition and any required duct replacement
- Electrical upgrades and new disconnect
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Tulsa Development ServicesConfirmed department |
| electrical | City of Tulsa Development ServicesConfirmed department |
| mechanical | City of Tulsa Development ServicesConfirmed department |
| plumbing | City of Tulsa Development ServicesConfirmed department |
| zoning | City of Tulsa Development ServicesConfirmed department |
| fire | City of Tulsa Development ServicesConfirmed department |
Permit requirement in Tulsa
Yes — a permit is required for ac replacement in Tulsa, OK. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Tulsa Development ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $80–$285.
Inspections
- Mechanical rough / equipment set
- Electrical disconnect
- Final mechanical inspection
Local conditions that change this job
Only the exposures that materially affect ac replacement.
Cooling load / heat exposure
Severe82/100
Humidity
Severe84/100
Solar irradiance
Severe82/100
Nearby market comparison
| Market | Local factor | Median | Per ton of cooling capacity |
|---|---|---|---|
| Tulsa (this page) | x0.933 | $8,300 | $1,500 – $3,000 |
| Broken Arrow | x0.887 | $7,900 | $1,400 – $2,850 |
| Edmond | x0.887 | $7,900 | $1,400 – $2,850 |
| Oklahoma City | x0.925 | $8,200 | $1,500 – $2,950 |
What Tulsa homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Tulsa
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Tulsa ac costs
Hometriva does not publish invented city prices. The Tulsa estimate for ac replacement is produced by this chain, and every input is stored separately:
- National baseline$8,900
Typical U.S. cost for ac replacement on a single-family home.
- Local labor factorx0.883
Tulsa-area trade labor rates, weighted at 45% of this job.
- Material factorx0.965
Material and delivery pricing into Tulsa County, weighted at 55%.
- Regulatory factorx1.010
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx0.933
Blended Tulsa adjustment specific to ac replacement.
- Permit component$80 – $285
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, ac replacement in Tulsa carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ac replacement pricing in Tulsa, OK.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for ac replacement in Tulsa, OK?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does ac replacement take?
1 day of work, 1-3 weeks including permit and inspection. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are system size in tons and seer2 efficiency rating; heat pump versus straight cool with electric heat; air handler location (attic, closet, garage).
Sources
Sources & verification
- City of Tulsa Development Services
- Oklahoma Uniform Building Code Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.