Attic Insulation cost in Raleigh, NC
Raleigh, NC · updated August 2026
$2,800
Typical local cost
$1,200 – $7,400
Typical range
- per sq ft of attic floor
- $1 – $4.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $155 in fees
1 day of work
Raleigh runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Raleigh is $2,800. The local adjustment for this trade is x0.987 — driven mainly by Wake County labor rates and 5% exposure to local code requirements.
Estimate your Raleigh job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Raleigh (local adjustment x0.987).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 600 sq ft of attic floor | $600 – $2,700 |
| 800 sq ft of attic floor | $800 – $3,600 |
| 1,000 sq ft of attic floor | $1,000 – $4,500 |
| 1,300 sq ft of attic floor | $1,300 – $5,900 |
| 1,700 sq ft of attic floor | $1,700 – $7,700 |
Based on Raleigh pricing of $1–$5 per sq ft of attic floor.
Where the money goes
- Labor
- $1,000
- 35% of median
- Materials
- $1,800
- 63% of median
- Permit & fees
- $80
- 3% of median
Raleigh project costs-1% vs U.S. average
Based on Wake County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Raleigh labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$73–$94
Energy crews in Wake County · -3% vs U.S. ($85/hr)
Typical crew
2 × 1 day
On-site time for a typical insulation job here.
Labor in the price
$1,000
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Raleigh wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national energy crew rates adjusted by the Wake County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Raleigh differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$25
Wake County crews price 3% below the national average, and labor is 35% of this job.
Basis: Decomposition of the modeled Raleigh median against the U.S. median for this scope. · City of Raleigh building department, Hometriva methodology
Raleigh vs North Carolina vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated attic insulation in Raleigh
$2,880
Likely range $1,280 – $7,480
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Attic square footage and existing R-value
- Blown cellulose or fiberglass versus spray foam
- Air sealing of penetrations before insulating
- Attic access and headroom
- Removal of contaminated existing insulation
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Raleigh building departmentModeled estimate |
| electrical | City of Raleigh building departmentModeled estimate |
| mechanical | City of Raleigh building departmentModeled estimate |
| plumbing | City of Raleigh building departmentModeled estimate |
| zoning | City of Raleigh building departmentModeled estimate |
| fire | City of Raleigh building departmentModeled estimate |
Permit requirement in Raleigh
A permit is usually not required for attic insulation on its own. Raleigh still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Raleigh building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$155Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect attic insulation.
Cooling load / heat exposure
Severe80/100
Solar irradiance
High70/100
Humidity
High74/100
Rapid growth and North Carolina's statewide licensing rules keep general-contractor pricing tighter than the Southeast average.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of attic floor |
|---|---|---|---|
| Raleigh (this page) | x0.987 | $2,800 | $1 – $4.50 |
| Cary | x0.971 | $2,700 | $1 – $4.50 |
| Durham | x0.971 | $2,700 | $1 – $4.50 |
| Fayetteville | x0.971 | $2,700 | $1 – $4.50 |
+ Had attic insulation done in Raleigh? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Raleigh insulation costs
Hometriva does not publish invented city prices. The Raleigh estimate for attic insulation is produced by this chain, and every input is stored separately:
- National baseline$2,800
Typical U.S. cost for attic insulation on a single-family home.
- Local labor factorx0.974
Raleigh-area trade labor rates, weighted at 35% of this job.
- Material factorx0.991
Material and delivery pricing into Wake County, weighted at 65%.
- Regulatory factorx1.033
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.987
Blended Raleigh adjustment specific to attic insulation.
- Permit component$0 – $155
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, attic insulation in Raleigh carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for attic insulation pricing in Raleigh, NC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does attic insulation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are attic square footage and existing r-value; blown cellulose or fiberglass versus spray foam; air sealing of penetrations before insulating.
Sources
Sources & verification
- City of Raleigh building department
- Raleigh permit portal
- North Carolina Department of Insurance, OSFM
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.