Attic Insulation cost in Galveston, TX
Galveston, TX · updated August 2026
$2,600
Typical local cost
$1,100 – $7,100
Typical range
- per sq ft of attic floor
- $1 – $4.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $135 in fees
1 day of work
Galveston runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Galveston homeowners pay around $2,600. The local adjustment for this trade is x0.945 — driven mainly by Galveston County labor rates and 5% exposure to local code requirements.
Estimate your Galveston job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 600 sq ft of attic floor | $600 – $2,700 |
| 800 sq ft of attic floor | $800 – $3,600 |
| 1,000 sq ft of attic floor | $1,000 – $4,500 |
| 1,300 sq ft of attic floor | $1,300 – $5,900 |
| 1,700 sq ft of attic floor | $1,700 – $7,700 |
Based on Galveston pricing of $1–$5 per sq ft of attic floor.
Where the money goes
- Labor
- $900
- 34% of median
- Materials
- $1,700
- 64% of median
- Permit & fees
- $70
- 3% of median
Galveston project costs-6% vs U.S. average
Based on Galveston County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Galveston labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$67–$87
Energy crews in Galveston County · -10% vs U.S. ($85/hr)
Typical crew
2 × 0.5 days
On-site time for a typical insulation job here.
Labor in the price
$900
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Galveston wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national energy crew rates adjusted by the Galveston County labor factor (x0.896). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Galveston differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$100
Galveston County crews price 10% below the national average, and labor is 35% of this job.
Material and delivery-$50
Materials are nationally traded, so they move less — but delivery into this market runs 3% under baseline.
Basis: Decomposition of the modeled Galveston median against the U.S. median for this scope. · City of Galveston building department, Hometriva methodology
Galveston vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated attic insulation in Galveston
$2,670
Likely range $1,170 – $7,170
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Attic square footage and existing R-value
- Blown cellulose or fiberglass versus spray foam
- Air sealing of penetrations before insulating
- Attic access and headroom
- Removal of contaminated existing insulation
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Galveston building departmentModeled estimate |
| electrical | City of Galveston building departmentModeled estimate |
| mechanical | City of Galveston building departmentModeled estimate |
| plumbing | City of Galveston building departmentModeled estimate |
| zoning | City of Galveston building departmentModeled estimate |
| fire | City of Galveston building departmentModeled estimate |
Permit requirement in Galveston
Usually no permit is required in Galveston, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Galveston building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$135Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect attic insulation.
Cooling load / heat exposure
Severe82/100
Solar irradiance
Severe82/100
Humidity
Severe84/100
Galveston sits in Galveston County, Texas. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of attic floor |
|---|---|---|---|
| Galveston (this page) | x0.945 | $2,600 | $1 – $4.50 |
| El Paso | x1.004 | $2,800 | $1 – $4.50 |
| Arlington | x1.004 | $2,800 | $1 – $4.50 |
| Corpus Christi | x0.987 | $2,800 | $1 – $4.50 |
What Galveston homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Galveston
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Galveston insulation costs
Hometriva does not publish invented city prices. The Galveston estimate for attic insulation is produced by this chain, and every input is stored separately:
- National baseline$2,800
Typical U.S. cost for attic insulation on a single-family home.
- Local labor factorx0.896
Galveston-area trade labor rates, weighted at 35% of this job.
- Material factorx0.971
Material and delivery pricing into Galveston County, weighted at 65%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.945
Blended Galveston adjustment specific to attic insulation.
- Permit component$0 – $135
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, attic insulation in Galveston carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for attic insulation pricing in Galveston, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
What R-value does Florida require in the attic?
The Florida Energy Conservation Code generally calls for R-30 to R-38 in a vented attic for a residential retrofit. Check with your building department, since the requirement depends on assembly type.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.