Attic Insulation cost in Laramie, WY
Laramie, WY · updated August 2026
$2,700
Typical local cost
$1,200 – $7,300
Typical range
- per sq ft of attic floor
- $1 – $4.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $115 in fees
1 day of work
Laramie runs -3% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Laramie is $2,700. The local adjustment for this trade is x0.968 — driven mainly by Albany County labor rates and 5% exposure to local code requirements.
Estimate your Laramie job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Laramie (local adjustment x0.968).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 600 sq ft of attic floor | $600 – $2,700 |
| 800 sq ft of attic floor | $800 – $3,600 |
| 1,000 sq ft of attic floor | $1,000 – $4,500 |
| 1,300 sq ft of attic floor | $1,300 – $5,900 |
| 1,700 sq ft of attic floor | $1,700 – $7,700 |
Based on Laramie pricing of $1–$5 per sq ft of attic floor.
Where the money goes
- Labor
- $900
- 33% of median
- Materials
- $1,800
- 65% of median
- Permit & fees
- $60
- 2% of median
Laramie project costs-3% vs U.S. average
Based on Albany County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Laramie labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$70–$91
Energy crews in Albany County · -6% vs U.S. ($85/hr)
Typical crew
2 × 0.5 days
On-site time for a typical insulation job here.
Labor in the price
$900
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Laramie wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national energy crew rates adjusted by the Albany County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Laramie differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$75
Albany County crews price 6% below the national average, and labor is 35% of this job.
Basis: Decomposition of the modeled Laramie median against the U.S. median for this scope. · City of Laramie building department, Hometriva methodology
Laramie vs Wyoming vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated attic insulation in Laramie
$2,760
Likely range $1,260 – $7,360
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Attic square footage and existing R-value
- Blown cellulose or fiberglass versus spray foam
- Air sealing of penetrations before insulating
- Attic access and headroom
- Removal of contaminated existing insulation
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Laramie building departmentModeled estimate |
| electrical | City of Laramie building departmentModeled estimate |
| mechanical | City of Laramie building departmentModeled estimate |
| plumbing | City of Laramie building departmentModeled estimate |
| zoning | City of Laramie building departmentModeled estimate |
| fire | City of Laramie building departmentModeled estimate |
Permit requirement in Laramie
A permit is usually not required for attic insulation on its own. Laramie still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Laramie building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$115Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect attic insulation.
Cooling load / heat exposure
Severe82/100
Solar irradiance
Severe82/100
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per sq ft of attic floor |
|---|---|---|---|
| Laramie (this page) | x0.968 | $2,700 | $1 – $4.50 |
| Cheyenne | x0.993 | $2,800 | $1 – $4.50 |
| Fort Collins | x1.095 | $3,100 | $1.50 – $5 |
| Greeley | x1.078 | $3,000 | $1.50 – $5 |
What Laramie homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Laramie
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Laramie insulation costs
Hometriva does not publish invented city prices. The Laramie estimate for attic insulation is produced by this chain, and every input is stored separately:
- National baseline$2,800
Typical U.S. cost for attic insulation on a single-family home.
- Local labor factorx0.935
Laramie-area trade labor rates, weighted at 35% of this job.
- Material factorx0.988
Material and delivery pricing into Albany County, weighted at 65%.
- Regulatory factorx0.969
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.968
Blended Laramie adjustment specific to attic insulation.
- Permit component$0 – $115
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, attic insulation in Laramie carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for attic insulation pricing in Laramie, WY.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does attic insulation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are attic square footage and existing r-value; blown cellulose or fiberglass versus spray foam; air sealing of penetrations before insulating.
Sources
Sources & verification
- Wyoming Department of Fire Prevention and Electrical Safety
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.