Basement Waterproofing cost in Fort Worth, TX

Fort Worth, TX · updated August 2026

$8,000

Typical local cost

$2,900 – $17,500

Typical range

per linear foot of drain installed
$50 – $150

Installed, local pricing

Permit
It depends

$0 – $410 in fees

Typical timeline
2-5 days of work

2-5 days of work

Fort Worth runs -3% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Fort Worth is $8,000. The local adjustment for this trade is x0.972 — driven mainly by Tarrant County labor rates and 20% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
45 linear foot of drain installed$2,300$6,800
60 linear foot of drain installed$3,000$9,000
75 linear foot of drain installed$3,800$11,300
100 linear foot of drain installed$5,000$15,000
130 linear foot of drain installed$6,500$19,500

Based on Fort Worth pricing of $50–$150 per linear foot of drain installed.

Where the money goes

Labor
$4,400
54% of median
Materials
$3,600
44% of median
Permit & fees
$205
2% of median

Fort Worth project costs-3% vs U.S. average

Based on Tarrant County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Fort Worth building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    2-5 days of work

  5. 05

    Inspection

    Plumbing inspection where a sump discharge is added

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Fort Worth labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$68–$89

Structural crews in Tarrant County · -5% vs U.S. ($82/hr)

Typical crew

3 × 2.5 days

On-site time for a typical waterproofing job here.

Labor in the price

$4,400

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Fort Worth wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national structural crew rates adjusted by the Tarrant County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Fort Worth differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$225Code and inspection load$75Material and delivery$75
Dollars of the Fort Worth difference owned by each driver, versus the U.S. median for basement waterproofing.
  • Trade labor rates-$225

    Tarrant County crews price 5% below the national average, and labor is 55% of this job.

  • Code and inspection load+$75

    Basement Waterproofing carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.

  • Material and delivery-$75

    Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.

Basis: Decomposition of the modeled Fort Worth median against the U.S. median for this scope. · City of Fort Worth building department, Hometriva methodology

Fort Worth vs Texas vs the U.S.

Fort Worth$2,900$17,500Texas average$2,900$17,400U.S. average$3,000$18,000
Modeled ranges for basement waterproofing. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated basement waterproofing in Fort Worth

$8,205

Likely range $3,105$17,705

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Interior drain tile versus exterior excavation and membrane
  • Linear feet of wall treated and the number of sump pits
  • Concrete breakout and replacement inside the slab
  • Battery backup or a second pump for redundancy
  • Grading, downspout extension and window well work outside

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Fort Worth building departmentModeled estimate
electricalCity of Fort Worth building departmentModeled estimate
mechanicalCity of Fort Worth building departmentModeled estimate
plumbingCity of Fort Worth building departmentModeled estimate
zoningCity of Fort Worth building departmentModeled estimate
fireCity of Fort Worth building departmentModeled estimate

Permit requirement in Fort Worth

It depends on scope. Like-for-like cosmetic work in Fort Worth is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.

Permitting authority
City of Fort Worth building departmentModeled estimate
Permit fee
Estimated allowance $0$410Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Plumbing inspection where a sump discharge is added
Full Fort Worth permit guide for basement waterproofing

Local conditions that change this job

Only the exposures that materially affect basement waterproofing.

Cooling load / heat exposure

Severe88/100

Humidity

Moderate58/100

Named-storm exposure

High74/100

Same hail belt as Dallas with a higher owner-occupancy share, which pushes more full replacements through insurance claims.

Nearby market comparison

MarketLocal factorMedianPer linear foot of drain installed
Fort Worth (this page)x0.972$8,000$50$150
Arlingtonx1.007$8,300$50$150
Grand Prairiex0.985$8,100$50$150
Irvingx0.985$8,100$50$150

What Fort Worth homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Fort Worth

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Fort Worth waterproofing costs

Hometriva does not publish invented city prices. The Fort Worth estimate for basement waterproofing is produced by this chain, and every input is stored separately:

  1. National baseline$8,200

    Typical U.S. cost for basement waterproofing on a single-family home.

  2. Local labor factorx0.948

    Fort Worth-area trade labor rates, weighted at 55% of this job.

  3. Material factorx0.981

    Material and delivery pricing into Tarrant County, weighted at 45%.

  4. Regulatory factorx1.045

    Local code, product-approval and inspection load, applied at 20% for this project type.

  5. Applied multiplierx0.972

    Blended Fort Worth adjustment specific to basement waterproofing.

  6. Permit component$0 – $410

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, basement waterproofing in Fort Worth carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for basement waterproofing pricing in Fort Worth, TX.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Is a permit needed to waterproof a basement?

Interior drainage is often treated as maintenance, but adding a sump discharge, altering plumbing or excavating against the foundation usually triggers a permit. Ask the local building department before work starts.

Does interior drainage fix the cause?

It manages water that has already reached the wall. When the cause is grading, gutters or a downspout discharging beside the foundation, correcting that outside is cheaper and should come first.

How long does basement waterproofing take?

2-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are interior drain tile versus exterior excavation and membrane; linear feet of wall treated and the number of sump pits; concrete breakout and replacement inside the slab.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages