Deck Construction cost in Winston-Salem, NC
Winston-Salem, NC · updated August 2026
$11,100
Typical local cost
$5,300 – $27,100
Typical range
- per sq ft of deck
- $29 – $72.50
- Permit
- Yes
- Typical timeline
- 1-2 weeks of work
Installed, local pricing
$110 – $445 in fees
1-2 weeks of work, 3-6 weeks including permitting
Winston-Salem runs -3% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Winston-Salem is $11,100. The local adjustment for this trade is x0.969 — driven mainly by Forsyth County labor rates and 55% exposure to local code requirements.
Estimate your Winston-Salem job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Deck area
320 sq ft
- Decking (linear feet)
- 696 lf
- 16 ft boards needed
- 44 boards
- Joists
- 16 at 16" o.c.
- Footings
- 8
- Installed cost estimate
- $11,861 – $18,837
Priced for Winston-Salem (local adjustment x0.969).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 125 sq ft of deck | $3,600 – $9,100 |
| 175 sq ft of deck | $5,100 – $12,700 |
| 225 sq ft of deck | $6,500 – $16,300 |
| 275 sq ft of deck | $8,000 – $19,900 |
| 375 sq ft of deck | $10,900 – $27,200 |
Based on Winston-Salem pricing of $29–$73 per sq ft of deck.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Composite Decking | $12,800 – $21,100 | 25–35 yrs | Very low |
| Pressure-Treated Decking | $6,400 – $10,500 | 10–20 yrs | High |
Where the money goes
- Labor
- $6,400
- 56% of median
- Materials
- $4,700
- 41% of median
- Permit & fees
- $280
- 2% of median
Winston-Salem project costs-3% vs U.S. average
Based on Forsyth County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Winston-Salem building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 weeks of work, 3-6 weeks including permitting
05
Inspection
Footing inspection, Framing inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Winston-Salem labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$51–$66
Outdoor crews in Forsyth County · -6% vs U.S. ($62/hr)
Typical crew
3 × 4.5 days
On-site time for a typical deck job here.
Labor in the price
$6,400
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Winston-Salem wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Forsyth County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Winston-Salem differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$425
Forsyth County crews price 6% below the national average, and labor is 58% of this job.
Code and inspection load+$150
Deck Construction carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.02.
Material and delivery-$50
Materials are nationally traded, so they move less — but delivery into this market runs 1% under baseline.
Basis: Decomposition of the modeled Winston-Salem median against the U.S. median for this scope. · City of Winston-Salem building department, Hometriva methodology
Winston-Salem vs North Carolina vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated deck construction in Winston-Salem
$11,380
Likely range $5,580 – $27,380
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Deck square footage and height above grade
- Material: pressure-treated pine, composite or hardwood
- Footings and uplift hardware
- Railings and stairs
- Attachment to the house versus freestanding
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Winston-Salem building departmentModeled estimate |
| electrical | City of Winston-Salem building departmentModeled estimate |
| mechanical | City of Winston-Salem building departmentModeled estimate |
| plumbing | City of Winston-Salem building departmentModeled estimate |
| zoning | City of Winston-Salem building departmentModeled estimate |
| fire | City of Winston-Salem building departmentModeled estimate |
Permit requirement in Winston-Salem
Yes — a permit is required for deck construction in Winston-Salem, NC. The work must be inspected before it can be closed out, and a homeowner may be able to pull an owner-builder permit on a home they own and occupy.
- Permitting authority
- City of Winston-Salem building departmentModeled estimate
- Permit fee
- Estimated allowance $110–$445Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Footing inspection
- Framing inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect deck construction.
Humidity
Severe84/100
Annual rainfall
High74/100
Coastal / salt-air exposure
Moderate45/100
Nearby market comparison
| Market | Local factor | Median | Per sq ft of deck |
|---|---|---|---|
| Winston-Salem (this page) | x0.969 | $11,100 | $29 – $72.50 |
| High Point | x0.944 | $10,900 | $28.50 – $71 |
| Greensboro | x0.969 | $11,100 | $29 – $72.50 |
| Charlotte | x0.989 | $11,400 | $29.50 – $74 |
What Winston-Salem homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Winston-Salem
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Winston-Salem deck costs
Hometriva does not publish invented city prices. The Winston-Salem estimate for deck construction is produced by this chain, and every input is stored separately:
- National baseline$11,500
Typical U.S. cost for deck construction on a single-family home.
- Local labor factorx0.935
Winston-Salem-area trade labor rates, weighted at 58% of this job.
- Material factorx0.988
Material and delivery pricing into Forsyth County, weighted at 42%.
- Regulatory factorx1.022
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx0.969
Blended Winston-Salem adjustment specific to deck construction.
- Permit component$110 – $445
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, deck construction in Winston-Salem carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for deck construction pricing in Winston-Salem, NC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for deck construction in Winston-Salem, NC?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does deck construction take?
1-2 weeks of work, 3-6 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are deck square footage and height above grade; material: pressure-treated pine, composite or hardwood; footings and uplift hardware.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.