Drain Field Replacement cost in Billings, MT
Billings, MT · updated August 2026
$12,600
Typical local cost
$6,100 – $25,300
Typical range
- per bedroom of design flow
- $1,800 – $5,550
- Permit
- Yes
- Typical timeline
- 2-4 days of work
Installed, local pricing
$130 – $790 in fees
2-4 days of work, 3-10 weeks including evaluation and permitting
Billings runs +1% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Billings is $12,600. The local adjustment for this trade is x1.010 — driven mainly by Yellowstone County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 2 bedroom of design flow | $3,600 – $11,100 |
| 3 bedroom of design flow | $5,400 – $16,700 |
| 4 bedroom of design flow | $7,200 – $22,200 |
| 6 bedroom of design flow | $10,800 – $33,300 |
Based on Billings pricing of $1,800–$5,550 per bedroom of design flow.
Where the money goes
- Labor
- $7,800
- 60% of median
- Materials
- $4,800
- 37% of median
- Permit & fees
- $460
- 4% of median
Billings project costs+1% vs U.S. average
Based on Yellowstone County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Billings building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-4 days of work, 3-10 weeks including evaluation and permitting
05
Inspection
Soil / percolation evaluation, Open trench inspection, Final cover inspection
06
Closeout
Final sign-off, warranty and documentation
Billings labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$92–$120
Plumbing crews in Yellowstone County · 0% vs U.S. ($105/hr)
Typical crew
3 × 3 days
On-site time for a typical drain field job here.
Labor in the price
$7,800
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Billings wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Yellowstone County labor factor (x1.000). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Billings differs from the national average
The local delta, broken into dollars by driver.
Material and delivery+$75
Materials are nationally traded, so they move less — but delivery into this market runs 2% over baseline.
Permit fees-$75
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Code and inspection load+$50
Drain Field Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Basis: Decomposition of the modeled Billings median against the U.S. median for this scope. · City of Billings building department, Hometriva methodology
Billings vs Montana vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drain field replacement in Billings
$13,060
Likely range $6,560 – $25,760
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Design flow, usually set by bedroom count
- Soil percolation rate and depth to water table
- Conventional trenches, chambers or an engineered mound system
- Tank condition, pump chamber and distribution box replacement
- Excavation access, tree removal and landscape restoration
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Billings building departmentModeled estimate |
| electrical | City of Billings building departmentModeled estimate |
| mechanical | City of Billings building departmentModeled estimate |
| plumbing | City of Billings building departmentModeled estimate |
| zoning | City of Billings building departmentModeled estimate |
| fire | City of Billings building departmentModeled estimate |
Permit requirement in Billings
Yes — a permit is required for drain field replacement in Billings, MT. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Billings building departmentModeled estimate
- Permit fee
- Estimated allowance $130–$790Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Soil / percolation evaluation
- Open trench inspection
- Final cover inspection
Local conditions that change this job
Only the exposures that materially affect drain field replacement.
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per bedroom of design flow |
|---|---|---|---|
| Billings (this page) | x1.010 | $12,600 | $1,800 – $5,550 |
| Bozeman | x0.971 | $12,100 | $1,750 – $5,350 |
What Billings homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Billings
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Billings drain field costs
Hometriva does not publish invented city prices. The Billings estimate for drain field replacement is produced by this chain, and every input is stored separately:
- National baseline$12,500
Typical U.S. cost for drain field replacement on a single-family home.
- Local labor factorx1.000
Billings-area trade labor rates, weighted at 62% of this job.
- Material factorx1.016
Material and delivery pricing into Yellowstone County, weighted at 38%.
- Regulatory factorx1.007
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.010
Blended Billings adjustment specific to drain field replacement.
- Permit component$130 – $790
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drain field replacement in Billings carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drain field replacement pricing in Billings, MT.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Who issues a drain field permit?
Onsite sewage permits are usually issued by the county or state health department rather than the building department, and a soil evaluation is normally required before a permit is issued.
Can a failed drain field be repaired instead of replaced?
Sometimes. Pumping, jetting or fixing a broken distribution box can restore a field that failed from overload rather than age. A field that has lost soil acceptance has to be replaced.
Do I need a permit for drain field replacement in Billings, MT?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does drain field replacement take?
2-4 days of work, 3-10 weeks including evaluation and permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are design flow, usually set by bedroom count; soil percolation rate and depth to water table; conventional trenches, chambers or an engineered mound system.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.