Drywall Repair cost in Yuma, AZ
Yuma, AZ · updated August 2026
$1,200
Typical local cost
$400 – $4,500
Typical range
- per sheet replaced
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $115 in fees
1-3 days including finishing
Yuma runs 0% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Yuma homeowners pay around $1,200. The local adjustment for this trade is x1.005 — driven mainly by Yuma County labor rates and 5% exposure to local code requirements.
Estimate your Yuma job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $352 – $572
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $1,200 |
| 8 sheet replaced | $400 – $1,600 |
| 10 sheet replaced | $500 – $2,000 |
| 13 sheet replaced | $700 – $2,600 |
| 17 sheet replaced | $900 – $3,400 |
Based on Yuma pricing of $50–$200 per sheet replaced.
Where the money goes
- Labor
- $900
- 71% of median
- Materials
- $300
- 24% of median
- Permit & fees
- $60
- 5% of median
Yuma project costs+0% vs U.S. average
Based on Yuma County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Yuma labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$51–$66
Interior crews in Yuma County · 0% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$900
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Yuma wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Yuma County labor factor (x1.000). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Yuma differs from the national average
The local delta, broken into dollars by driver.
Basis: Decomposition of the modeled Yuma median against the U.S. median for this scope. · City of Yuma building department, Hometriva methodology
Yuma vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Yuma
$1,260
Likely range $460 – $4,560
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Yuma building departmentModeled estimate |
| electrical | City of Yuma building departmentModeled estimate |
| mechanical | City of Yuma building departmentModeled estimate |
| plumbing | City of Yuma building departmentModeled estimate |
| zoning | City of Yuma building departmentModeled estimate |
| fire | City of Yuma building departmentModeled estimate |
Permit requirement in Yuma
Usually no permit is required in Yuma, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Yuma building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$115Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Severe84/100
Yuma sits in Yuma County, Arizona. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
What Yuma homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Yuma
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Yuma drywall costs
Hometriva does not publish invented city prices. The Yuma estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.000
Yuma-area trade labor rates, weighted at 76% of this job.
- Material factorx1.016
Material and delivery pricing into Yuma County, weighted at 24%.
- Regulatory factorx1.027
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.005
Blended Yuma adjustment specific to drywall repair.
- Permit component$0 – $115
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Yuma carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Yuma, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.