Drywall Repair cost in Biloxi, MS
Biloxi, MS · updated August 2026
$1,000
Typical local cost
$300 – $3,600
Typical range
- per sheet replaced
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $90 in fees
1-3 days including finishing
Biloxi runs -20% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Biloxi is $1,000. The local adjustment for this trade is x0.801 — driven mainly by Harrison County labor rates and 5% exposure to local code requirements.
Estimate your Biloxi job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $282 – $458
Priced for Biloxi (local adjustment x0.801).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $900 |
| 8 sheet replaced | $400 – $1,200 |
| 10 sheet replaced | $500 – $1,500 |
| 13 sheet replaced | $700 – $2,000 |
| 17 sheet replaced | $900 – $2,600 |
Based on Biloxi pricing of $50–$150 per sheet replaced.
Where the money goes
- Labor
- $800
- 77% of median
- Materials
- $200
- 19% of median
- Permit & fees
- $45
- 4% of median
Biloxi project costs-20% vs U.S. average
Based on Harrison County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Biloxi labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$39–$51
Interior crews in Harrison County · -23% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$800
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Biloxi wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Harrison County labor factor (x0.766). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Biloxi differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$225
Harrison County crews price 23% below the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled Biloxi median against the U.S. median for this scope. · City of Biloxi building department, Hometriva methodology
Biloxi vs Mississippi vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Biloxi
$1,045
Likely range $345 – $3,645
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Biloxi building departmentModeled estimate |
| electrical | City of Biloxi building departmentModeled estimate |
| mechanical | City of Biloxi building departmentModeled estimate |
| plumbing | City of Biloxi building departmentModeled estimate |
| zoning | City of Biloxi building departmentModeled estimate |
| fire | City of Biloxi building departmentModeled estimate |
Permit requirement in Biloxi
A permit is usually not required for drywall repair on its own. Biloxi still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Biloxi building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$90Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Severe84/100
Biloxi sits in Harrison County, Mississippi. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Biloxi (this page) | x0.801 | $1,000 | $50 – $150 |
| Gulfport | x0.835 | $1,000 | $50 – $150 |
| Mobile | x0.914 | $1,100 | $50 – $150 |
| Hattiesburg | x0.801 | $1,000 | $50 – $150 |
What Biloxi homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Biloxi
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Biloxi drywall costs
Hometriva does not publish invented city prices. The Biloxi estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx0.766
Biloxi-area trade labor rates, weighted at 76% of this job.
- Material factorx0.915
Material and delivery pricing into Harrison County, weighted at 24%.
- Regulatory factorx0.969
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.801
Blended Biloxi adjustment specific to drywall repair.
- Permit component$0 – $90
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Biloxi carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Biloxi, MS.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
How long does drywall repair take?
1-3 days including finishing. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number and size of patches; ceiling versus wall work; texture matching, including knockdown and popcorn.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.