Drywall Repair cost in Orlando, FL
Orlando, FL · updated August 2026
$1,200
Typical local cost
$400 – $4,600
Typical range
- per sheet replaced
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $120 in fees
1-3 days including finishing
Orlando runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Orlando is $1,200. The local adjustment for this trade is x1.025 — driven mainly by Orange County labor rates and 5% exposure to local code requirements.
Estimate your Orlando job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $361 – $586
Priced for Orlando (local adjustment x1.025).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $1,200 |
| 8 sheet replaced | $400 – $1,600 |
| 10 sheet replaced | $500 – $2,000 |
| 13 sheet replaced | $700 – $2,600 |
| 17 sheet replaced | $900 – $3,400 |
Based on Orlando pricing of $50–$200 per sheet replaced.
Where the money goes
- Labor
- $900
- 71% of median
- Materials
- $300
- 24% of median
- Permit & fees
- $60
- 5% of median
Orlando project costs+2% vs U.S. average
Based on Orange County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Orlando labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$52–$68
Interior crews in Orange County · +3% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$900
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Orlando wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Orange County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Orlando differs from the national average
The local delta, broken into dollars by driver.
Basis: Decomposition of the modeled Orlando median against the U.S. median for this scope. · City of Orlando Permitting Services, Hometriva methodology
Orlando vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Orlando
$1,260
Likely range $460 – $4,660
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Orlando Permitting ServicesConfirmed department |
| electrical | City of Orlando Permitting ServicesConfirmed department |
| mechanical | City of Orlando Permitting ServicesConfirmed department |
| plumbing | City of Orlando Permitting ServicesConfirmed department |
| zoning | City of Orlando Permitting ServicesConfirmed department |
| fire | City of Orlando Permitting ServicesConfirmed department |
Permit requirement in Orlando
A permit is usually not required for drywall repair on its own. Orlando still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Orlando Permitting ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0–$120.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Severe84/100
Orlando is inland with a 130 mph design wind speed, so opening protection requirements are lighter than South Florida.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Orlando (this page) | x1.025 | $1,200 | $50 – $200 |
| Kissimmee | x0.979 | $1,200 | $50 – $200 |
| Lakeland | x0.945 | $1,100 | $50 – $150 |
| Daytona Beach | x0.986 | $1,200 | $50 – $200 |
What Orlando homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Orlando
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Orlando drywall costs
Hometriva does not publish invented city prices. The Orlando estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.026
Orlando-area trade labor rates, weighted at 76% of this job.
- Material factorx1.014
Material and delivery pricing into Orange County, weighted at 24%.
- Regulatory factorx1.037
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.025
Blended Orlando adjustment specific to drywall repair.
- Permit component$0 – $120
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Orlando carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Orlando, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
How long does drywall repair take?
1-3 days including finishing. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number and size of patches; ceiling versus wall work; texture matching, including knockdown and popcorn.
Sources
Sources & verification
- City of Orlando Permitting Services
- Orlando permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.