Drywall Repair cost in St. Petersburg, FL
St. Petersburg, FL · updated August 2026
$1,300
Typical local cost
$400 – $4,700
Typical range
- per sheet replaced
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $125 in fees
1-3 days including finishing
St. Petersburg runs +4% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for St. Petersburg is $1,300. The local adjustment for this trade is x1.044 — driven mainly by Pinellas County labor rates and 5% exposure to local code requirements.
Estimate your St. Petersburg job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $367 – $597
Priced for St. Petersburg (local adjustment x1.044).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $1,200 |
| 8 sheet replaced | $400 – $1,600 |
| 10 sheet replaced | $500 – $2,000 |
| 13 sheet replaced | $700 – $2,600 |
| 17 sheet replaced | $900 – $3,400 |
Based on St. Petersburg pricing of $50–$200 per sheet replaced.
Where the money goes
- Labor
- $1,000
- 73% of median
- Materials
- $300
- 22% of median
- Permit & fees
- $65
- 5% of median
St. Petersburg project costs+4% vs U.S. average
Based on Pinellas County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
St. Petersburg labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$53–$69
Interior crews in Pinellas County · +4% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$1,000
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, St. Petersburg wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Pinellas County labor factor (x1.039). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why St. Petersburg differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$25
Pinellas County crews price 4% above the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled St. Petersburg median against the U.S. median for this scope. · City of St. Petersburg building department, Hometriva methodology
St. Petersburg vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in St. Petersburg
$1,365
Likely range $465 – $4,765
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of St. Petersburg building departmentModeled estimate |
| electrical | City of St. Petersburg building departmentModeled estimate |
| mechanical | City of St. Petersburg building departmentModeled estimate |
| plumbing | City of St. Petersburg building departmentModeled estimate |
| zoning | City of St. Petersburg building departmentModeled estimate |
| fire | City of St. Petersburg building departmentModeled estimate |
Permit requirement in St. Petersburg
A permit is usually not required for drywall repair on its own. St. Petersburg still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of St. Petersburg building departmentModeled estimate
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0–$125.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Severe84/100
Large parts of Pinellas County sit in FEMA flood zones, which triggers substantial-improvement review on bigger remodels.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| St. Petersburg (this page) | x1.044 | $1,300 | $50 – $200 |
| Tampa | x1.054 | $1,300 | $50 – $200 |
| Clearwater | x1.033 | $1,200 | $50 – $200 |
| Bradenton | x1.066 | $1,300 | $50 – $200 |
What St. Petersburg homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in St. Petersburg
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates St. Petersburg drywall costs
Hometriva does not publish invented city prices. The St. Petersburg estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.039
St. Petersburg-area trade labor rates, weighted at 76% of this job.
- Material factorx1.047
Material and delivery pricing into Pinellas County, weighted at 24%.
- Regulatory factorx1.064
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.044
Blended St. Petersburg adjustment specific to drywall repair.
- Permit component$0 – $125
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in St. Petersburg carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in St. Petersburg, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
How long does drywall repair take?
1-3 days including finishing. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number and size of patches; ceiling versus wall work; texture matching, including knockdown and popcorn.
Sources
Sources & verification
- City of St. Petersburg building department
- St. Petersburg permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.