Drywall Repair cost in New York, NY
New York, NY · updated August 2026
$2,000
Typical local cost
$600 – $7,400
Typical range
- per sheet replaced
- $100 – $300
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $190 in fees
1-3 days including finishing
New York runs +64% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for New York is $2,000. The local adjustment for this trade is x1.637 — driven mainly by New York County labor rates and 5% exposure to local code requirements.
Estimate your New York job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $576 – $936
Priced for New York (local adjustment x1.637).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $600 – $1,800 |
| 8 sheet replaced | $800 – $2,400 |
| 10 sheet replaced | $1,000 – $3,000 |
| 13 sheet replaced | $1,300 – $3,900 |
| 17 sheet replaced | $1,700 – $5,100 |
Based on New York pricing of $100–$300 per sheet replaced.
Where the money goes
- Labor
- $1,500
- 72% of median
- Materials
- $500
- 24% of median
- Permit & fees
- $95
- 5% of median
New York project costs+64% vs U.S. average
Based on New York County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
New York labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$88–$113
Interior crews in New York County · +72% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$1,500
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, New York wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the New York County labor factor (x1.715). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why New York differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$650
New York County crews price 72% above the national average, and labor is 76% of this job.
Material and delivery+$100
Materials are nationally traded, so they move less — but delivery into this market runs 32% over baseline.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled New York median against the U.S. median for this scope. · City of New York building department, Hometriva methodology
New York vs New York vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in New York
$2,095
Likely range $695 – $7,495
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of New York building departmentModeled estimate |
| electrical | City of New York building departmentModeled estimate |
| mechanical | City of New York building departmentModeled estimate |
| plumbing | City of New York building departmentModeled estimate |
| zoning | City of New York building departmentModeled estimate |
| fire | City of New York building departmentModeled estimate |
Permit requirement in New York
A permit is usually not required for drywall repair on its own. New York still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of New York building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$190Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
High66/100
DOB filing, licensed-trade requirements and co-op/condo alteration agreements make New York the most expensive permitted-work market in the country.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| New York (this page) | x1.637 | $2,000 | $100 – $300 |
| Jersey City | x1.270 | $1,500 | $100 – $250 |
| Newark | x1.324 | $1,600 | $100 – $250 |
| Elizabeth | x1.247 | $1,500 | $100 – $200 |
+ Had drywall repair done in New York? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates New York drywall costs
Hometriva does not publish invented city prices. The New York estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.715
New York-area trade labor rates, weighted at 76% of this job.
- Material factorx1.321
Material and delivery pricing into New York County, weighted at 24%.
- Regulatory factorx1.209
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.637
Blended New York adjustment specific to drywall repair.
- Permit component$0 – $190
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in New York carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in New York, NY.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
How long does drywall repair take?
1-3 days including finishing. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number and size of patches; ceiling versus wall work; texture matching, including knockdown and popcorn.
Sources
Sources & verification
- City of New York building department
- New York permit portal
- New York Department of State Division of Building Standards
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.