Drywall Repair cost in Santa Fe, NM
Santa Fe, NM · updated August 2026
$1,100
Typical local cost
$300 – $4,200
Typical range
- per sheet replaced
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $105 in fees
1-3 days including finishing
Santa Fe runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Santa Fe is $1,100. The local adjustment for this trade is x0.937 — driven mainly by Santa Fe County labor rates and 5% exposure to local code requirements.
Estimate your Santa Fe job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $330 – $536
Priced for Santa Fe (local adjustment x0.937).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $900 |
| 8 sheet replaced | $400 – $1,200 |
| 10 sheet replaced | $500 – $1,500 |
| 13 sheet replaced | $700 – $2,000 |
| 17 sheet replaced | $900 – $2,600 |
Based on Santa Fe pricing of $50–$150 per sheet replaced.
Where the money goes
- Labor
- $800
- 69% of median
- Materials
- $300
- 26% of median
- Permit & fees
- $55
- 5% of median
Santa Fe project costs-6% vs U.S. average
Based on Santa Fe County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Santa Fe labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$47–$61
Interior crews in Santa Fe County · -8% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$800
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Santa Fe wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Santa Fe County labor factor (x0.922). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Santa Fe differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$75
Santa Fe County crews price 8% below the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled Santa Fe median against the U.S. median for this scope. · City of Santa Fe building department, Hometriva methodology
Santa Fe vs New Mexico vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Santa Fe
$1,155
Likely range $355 – $4,255
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Santa Fe building departmentModeled estimate |
| electrical | City of Santa Fe building departmentModeled estimate |
| mechanical | City of Santa Fe building departmentModeled estimate |
| plumbing | City of Santa Fe building departmentModeled estimate |
| zoning | City of Santa Fe building departmentModeled estimate |
| fire | City of Santa Fe building departmentModeled estimate |
Permit requirement in Santa Fe
A permit is usually not required for drywall repair on its own. Santa Fe still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Santa Fe building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$105Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Santa Fe (this page) | x0.937 | $1,100 | $50 – $150 |
| Rio Rancho | x0.937 | $1,100 | $50 – $150 |
| Albuquerque | x0.922 | $1,100 | $50 – $150 |
| Farmington | x0.902 | $1,100 | $50 – $150 |
What Santa Fe homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Santa Fe
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Santa Fe drywall costs
Hometriva does not publish invented city prices. The Santa Fe estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx0.922
Santa Fe-area trade labor rates, weighted at 76% of this job.
- Material factorx0.982
Material and delivery pricing into Santa Fe County, weighted at 24%.
- Regulatory factorx1.007
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.937
Blended Santa Fe adjustment specific to drywall repair.
- Permit component$0 – $105
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Santa Fe carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Santa Fe, NM.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
How long does drywall repair take?
1-3 days including finishing. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number and size of patches; ceiling versus wall work; texture matching, including knockdown and popcorn.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.