Drywall Repair cost in El Paso, TX

El Paso, TX · updated August 2026

$1,200

Typical local cost

$300 – $4,500

Typical range

per sheet replaced
$50 – $200

Installed, local pricing

Permit
Usually no

$0 – $120 in fees

Typical timeline
1-3 days including finishing

1-3 days including finishing

Calculate my drywall cost

El Paso runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most El Paso homeowners pay around $1,200. The local adjustment for this trade is x0.995 — driven mainly by El Paso County labor rates and 5% exposure to local code requirements.

Estimate your El Paso job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Drywall sheets

22 sheets

700 sq ft with waste

Joint compound
7 gallons
Joint tape
2 rolls (500 ft)
Drywall screws
700 screws
Material cost estimate
$334 – $543

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 sheet replaced$300$1,200
8 sheet replaced$400$1,600
10 sheet replaced$500$2,000
13 sheet replaced$700$2,600
17 sheet replaced$900$3,400

Based on El Paso pricing of $50–$200 per sheet replaced.

Where the money goes

Labor
$900
71% of median
Materials
$300
24% of median
Permit & fees
$60
5% of median

El Paso project costs-1% vs U.S. average

Based on El Paso County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Scheduling

    No permit typically required for this scope

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days including finishing

  5. 05

    Closeout

    Final sign-off, warranty and documentation

El Paso labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$50–$65

Interior crews in El Paso County · -1% vs U.S. ($58/hr)

Typical crew

2 × 1 day

On-site time for a typical drywall job here.

Labor in the price

$900

76% of the median — the rest is material, disposal and permit.

Because labor is 76% of this job, El Paso wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national interior crew rates adjusted by the El Paso County labor factor (x0.987). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why El Paso differs from the national average

The local delta, broken into dollars by driver.

Basis: Decomposition of the modeled El Paso median against the U.S. median for this scope. · City of El Paso building department, Hometriva methodology

El Paso vs Texas vs the U.S.

El Paso$300$4,500Texas average$300$4,300U.S. average$350$4,500
Modeled ranges for drywall repair. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated drywall repair in El Paso

$1,260

Likely range $360$4,560

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of patches
  • Ceiling versus wall work
  • Texture matching, including knockdown and popcorn
  • Water damage requiring insulation replacement
  • Painting after finishing

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of El Paso building departmentModeled estimate
electricalCity of El Paso building departmentModeled estimate
mechanicalCity of El Paso building departmentModeled estimate
plumbingCity of El Paso building departmentModeled estimate
zoningCity of El Paso building departmentModeled estimate
fireCity of El Paso building departmentModeled estimate

Permit requirement in El Paso

Usually no permit is required in El Paso, but zoning rules such as setbacks and HOA approval can still apply.

Permitting authority
City of El Paso building departmentModeled estimate
Permit fee
Estimated allowance $0$120Modeled from comparable fee schedules — not an official quoted fee.
Full El Paso permit guide for drywall repair

Local conditions that change this job

Only the exposures that materially affect drywall repair.

Humidity

Severe84/100

El Paso sits in El Paso County, Texas. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer sheet replaced
El Paso (this page)x0.995$1,200$50$200
Arlingtonx0.995$1,200$50$200
Corpus Christix0.972$1,200$50$150
Planox0.972$1,200$50$150

What El Paso homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in El Paso

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates El Paso drywall costs

Hometriva does not publish invented city prices. The El Paso estimate for drywall repair is produced by this chain, and every input is stored separately:

  1. National baseline$1,200

    Typical U.S. cost for drywall repair on a single-family home.

  2. Local labor factorx0.987

    El Paso-area trade labor rates, weighted at 76% of this job.

  3. Material factorx1.010

    Material and delivery pricing into El Paso County, weighted at 24%.

  4. Regulatory factorx1.048

    Local code, product-approval and inspection load, applied at 5% for this project type.

  5. Applied multiplierx0.995

    Blended El Paso adjustment specific to drywall repair.

  6. Permit component$0 – $120

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, drywall repair in El Paso carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in El Paso, TX.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Should I fix drywall before or after a leak repair?

Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages