Drywall Repair cost in Fort Worth, TX
Fort Worth, TX · updated August 2026
$1,100
Typical local cost
$300 – $4,300
Typical range
- per sheet replaced
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $120 in fees
1-3 days including finishing
Fort Worth runs -4% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Fort Worth homeowners pay around $1,100. The local adjustment for this trade is x0.958 — driven mainly by Tarrant County labor rates and 5% exposure to local code requirements.
Estimate your Fort Worth job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $334 – $543
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $300 – $900 |
| 8 sheet replaced | $400 – $1,200 |
| 10 sheet replaced | $500 – $1,500 |
| 13 sheet replaced | $700 – $2,000 |
| 17 sheet replaced | $900 – $2,600 |
Based on Fort Worth pricing of $50–$150 per sheet replaced.
Where the money goes
- Labor
- $800
- 69% of median
- Materials
- $300
- 26% of median
- Permit & fees
- $60
- 5% of median
Fort Worth project costs-4% vs U.S. average
Based on Tarrant County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Fort Worth labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$48–$63
Interior crews in Tarrant County · -5% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$800
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Fort Worth wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Tarrant County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Fort Worth differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$50
Tarrant County crews price 5% below the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled Fort Worth median against the U.S. median for this scope. · City of Fort Worth building department, Hometriva methodology
Fort Worth vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Fort Worth
$1,160
Likely range $360 – $4,360
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Fort Worth building departmentModeled estimate |
| electrical | City of Fort Worth building departmentModeled estimate |
| mechanical | City of Fort Worth building departmentModeled estimate |
| plumbing | City of Fort Worth building departmentModeled estimate |
| zoning | City of Fort Worth building departmentModeled estimate |
| fire | City of Fort Worth building departmentModeled estimate |
Permit requirement in Fort Worth
Usually no permit is required in Fort Worth, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Fort Worth building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$120Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
Moderate58/100
Same hail belt as Dallas with a higher owner-occupancy share, which pushes more full replacements through insurance claims.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Fort Worth (this page) | x0.958 | $1,100 | $50 – $150 |
| Dallas | x0.981 | $1,200 | $50 – $200 |
| Austin | x1.062 | $1,300 | $50 – $200 |
| Oklahoma City | x0.890 | $1,100 | $50 – $150 |
What Fort Worth homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Fort Worth
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Fort Worth drywall costs
Hometriva does not publish invented city prices. The Fort Worth estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx0.948
Fort Worth-area trade labor rates, weighted at 76% of this job.
- Material factorx0.981
Material and delivery pricing into Tarrant County, weighted at 24%.
- Regulatory factorx1.045
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.958
Blended Fort Worth adjustment specific to drywall repair.
- Permit component$0 – $120
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Fort Worth carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Fort Worth, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
- City of Fort Worth building department
- Fort Worth permit portal
- Texas Department of Licensing and Regulation
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.