Drywall Repair cost in Minneapolis, MN
Minneapolis, MN · updated August 2026
$1,400
Typical local cost
$400 – $5,200
Typical range
- per sheet replaced
- $100 – $200
- Permit
- Usually no
- Typical timeline
- 1-3 days including finishing
Installed, local pricing
$0 – $135 in fees
1-3 days including finishing
Minneapolis runs +16% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Minneapolis homeowners pay around $1,400. The local adjustment for this trade is x1.162 — driven mainly by Hennepin County labor rates and 5% exposure to local code requirements.
Estimate your Minneapolis job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Drywall sheets
22 sheets
700 sq ft with waste
- Joint compound
- 7 gallons
- Joint tape
- 2 rolls (500 ft)
- Drywall screws
- 700 screws
- Material cost estimate
- $370 – $601
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 6 sheet replaced | $600 – $1,200 |
| 8 sheet replaced | $800 – $1,600 |
| 10 sheet replaced | $1,000 – $2,000 |
| 13 sheet replaced | $1,300 – $2,600 |
| 17 sheet replaced | $1,700 – $3,400 |
Based on Minneapolis pricing of $100–$200 per sheet replaced.
Where the money goes
- Labor
- $1,100
- 75% of median
- Materials
- $300
- 20% of median
- Permit & fees
- $70
- 5% of median
Minneapolis project costs+16% vs U.S. average
Based on Hennepin County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days including finishing
05
Closeout
Final sign-off, warranty and documentation
Minneapolis labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$60–$78
Interior crews in Hennepin County · +18% vs U.S. ($58/hr)
Typical crew
2 × 1 day
On-site time for a typical drywall job here.
Labor in the price
$1,100
76% of the median — the rest is material, disposal and permit.
Because labor is 76% of this job, Minneapolis wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Hennepin County labor factor (x1.182). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Minneapolis differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$175
Hennepin County crews price 18% above the national average, and labor is 76% of this job.
Basis: Decomposition of the modeled Minneapolis median against the U.S. median for this scope. · City of Minneapolis building department, Hometriva methodology
Minneapolis vs Minnesota vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated drywall repair in Minneapolis
$1,470
Likely range $470 – $5,270
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number and size of patches
- Ceiling versus wall work
- Texture matching, including knockdown and popcorn
- Water damage requiring insulation replacement
- Painting after finishing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Minneapolis building departmentModeled estimate |
| electrical | City of Minneapolis building departmentModeled estimate |
| mechanical | City of Minneapolis building departmentModeled estimate |
| plumbing | City of Minneapolis building departmentModeled estimate |
| zoning | City of Minneapolis building departmentModeled estimate |
| fire | City of Minneapolis building departmentModeled estimate |
Permit requirement in Minneapolis
Usually no permit is required in Minneapolis, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Minneapolis building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$135Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect drywall repair.
Humidity
High66/100
Design snow load, ice-dam prevention and deep frost footings change roofing, insulation and deck specifications versus southern markets.
Nearby market comparison
| Market | Local factor | Median | Per sheet replaced |
|---|---|---|---|
| Minneapolis (this page) | x1.162 | $1,400 | $100 – $200 |
| Milwaukee | x1.094 | $1,300 | $50 – $200 |
| Des Moines | x0.957 | $1,100 | $50 – $150 |
| Chicago | x1.233 | $1,500 | $100 – $200 |
What Minneapolis homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Minneapolis
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Minneapolis drywall costs
Hometriva does not publish invented city prices. The Minneapolis estimate for drywall repair is produced by this chain, and every input is stored separately:
- National baseline$1,200
Typical U.S. cost for drywall repair on a single-family home.
- Local labor factorx1.182
Minneapolis-area trade labor rates, weighted at 76% of this job.
- Material factorx1.081
Material and delivery pricing into Hennepin County, weighted at 24%.
- Regulatory factorx1.068
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.162
Blended Minneapolis adjustment specific to drywall repair.
- Permit component$0 – $135
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, drywall repair in Minneapolis carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for drywall repair pricing in Minneapolis, MN.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Should I fix drywall before or after a leak repair?
Always fix the water source and let the cavity dry first. Closing up a wet wall traps moisture and creates a mold problem that costs far more than the drywall.
Sources
Sources & verification
- City of Minneapolis building department
- Minneapolis permit portal
- Minnesota Department of Labor and Industry
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.