Electrical Panel Replacement cost in Franklin, TN
Franklin, TN · updated August 2026
$3,100
Typical local cost
$1,700 – $6,200
Typical range
- per panel upgrade
- $1,700 – $6,150
- Permit
- Yes
- Typical timeline
- 1 day of work
Installed, local pricing
$85 – $325 in fees
1 day of work, 1-4 weeks including utility coordination
Franklin runs -9% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Franklin is $3,100. The local adjustment for this trade is x0.905 — driven mainly by Williamson County labor rates and 65% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100-amp panel | $1,400 – $5,000 |
| 150-amp panel | $1,600 – $5,900 |
| 200-amp panel | $1,900 – $6,800 |
| 400-amp service | $2,900 – $10,500 |
Based on Franklin pricing of $1,700–$6,150 per panel upgrade.
Cost by service scenario
Panel work is not one project. Swapping a panel on an existing service is a different job from raising the service capacity with the utility involved. Every row is priced against the Franklin median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Like-for-like panel replacement | Same amperage, existing service and meter reused | $1,700 – $2,500 |
| 100A → 150A upgrade | New panel and breakers, service conductors evaluated | $2,500 – $3,400 |
| 100A → 200A service upgrade | New panel, meter base, grounding and utility reconnect | $3,100 – $4,300 |
| 200A upgrade with mast/service entrance work | New riser or weatherhead, exterior conductors replaced | $4,000 – $5,600 |
| 400A service | Large home, dual panels or subpanel feed | $5,900 – $8,400 |
- • The utility, not the electrician, controls the disconnect and reconnect window — schedule slippage here is the usual cause of a two-day job becoming a week.
- • Meter base replacement, grounding electrode upgrades and bonding to water and gas are routinely quoted separately; ask for them line by line.
- • Federal Pacific, Zinsco and fuse panels are commonly flagged by insurers and four-point inspections, which is why many replacements are not optional.
- • Overhead-to-underground conversions add trenching and are priced by the foot.
- • If an EV charger, heat pump or solar is coming, size the service for it now — the second trip repeats the permit, the inspection and the utility coordination.
Basis: Each scope is priced as a multiple of the modeled Franklin median for electrical panel replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Where the money goes
- Labor
- $1,900
- 57% of median
- Materials
- $1,200
- 36% of median
- Permit & fees
- $205
- 6% of median
Franklin project costs-9% vs U.S. average
Based on Williamson County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Franklin building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work, 1-4 weeks including utility coordination
05
Inspection
Utility disconnect coordination, Rough electrical, Final electrical inspection
06
Closeout
Final sign-off, warranty and documentation
Franklin labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$77–$99
Electrical crews in Williamson County · -13% vs U.S. ($100/hr)
Typical crew
2 × 1.5 days
On-site time for a typical panel job here.
Labor in the price
$1,900
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Franklin wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national electrical crew rates adjusted by the Williamson County labor factor (x0.870). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Franklin differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$275
Williamson County crews price 13% below the national average, and labor is 60% of this job.
Material and delivery-$50
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Permit fees-$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Franklin median against the U.S. median for this scope. · City of Franklin building department, Hometriva methodology
Franklin vs Tennessee vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated electrical panel replacement in Franklin
$3,305
Likely range $1,905 – $6,405
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Service size: 100A, 150A or 200A
- Meter can and service entrance conductor replacement
- Overhead versus underground service
- Surge protection and AFCI/GFCI breaker requirements
- Utility disconnect and reconnect scheduling
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Franklin building departmentModeled estimate |
| electrical | City of Franklin building departmentModeled estimate |
| mechanical | City of Franklin building departmentModeled estimate |
| plumbing | City of Franklin building departmentModeled estimate |
| zoning | City of Franklin building departmentModeled estimate |
| fire | City of Franklin building departmentModeled estimate |
Permit requirement in Franklin
Yes — a permit is required for electrical panel replacement in Franklin, TN. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Franklin building departmentModeled estimate
- Permit fee
- Estimated allowance $85–$325Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Utility disconnect coordination
- Rough electrical
- Final electrical inspection
Local conditions that change this job
Only the exposures that materially affect electrical panel replacement.
Named-storm exposure
High70/100
Flood zone exposure
Moderate50/100
Coastal / salt-air exposure
Moderate45/100
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
34,000
Approximate household count in Franklin, used to size the contractor pool for this trade.
Permit activity index
x0.85
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per panel upgrade |
|---|---|---|---|
| Franklin (this page) | x0.905 | $3,100 | $1,700 – $6,150 |
| Nashville | x1.034 | $3,500 | $1,950 – $7,050 |
| Murfreesboro | x0.930 | $3,200 | $1,750 – $6,300 |
| Clarksville | x0.930 | $3,200 | $1,750 – $6,300 |
What Franklin homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Franklin
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Franklin panel costs
Hometriva does not publish invented city prices. The Franklin estimate for electrical panel replacement is produced by this chain, and every input is stored separately:
- National baseline$3,400
Typical U.S. cost for electrical panel replacement on a single-family home.
- Local labor factorx0.870
Franklin-area trade labor rates, weighted at 60% of this job.
- Material factorx0.960
Material and delivery pricing into Williamson County, weighted at 40%.
- Regulatory factorx0.998
Local code, product-approval and inspection load, applied at 65% for this project type.
- Applied multiplierx0.905
Blended Franklin adjustment specific to electrical panel replacement.
- Permit component$85 – $325
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, electrical panel replacement in Franklin carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for electrical panel replacement pricing in Franklin, TN.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does a panel upgrade take?
The physical work is usually one day with power off for 4-8 hours. Utility disconnect scheduling and inspection generally stretch the total to one to four weeks.
Do I need a permit for electrical panel replacement in Franklin, TN?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does electrical panel replacement take?
1 day of work, 1-4 weeks including utility coordination. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are service size: 100a, 150a or 200a; meter can and service entrance conductor replacement; overhead versus underground service.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.