Electrical Panel Replacement cost in Round Rock, TX
Round Rock, TX · updated August 2026
$3,300
Typical local cost
$1,800 – $6,600
Typical range
- per panel upgrade
- $1,850 – $6,600
- Permit
- Yes
- Typical timeline
- 1 day of work
Installed, local pricing
$95 – $360 in fees
1 day of work, 1-4 weeks including utility coordination
Round Rock runs -3% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Round Rock homeowners pay around $3,300. The local adjustment for this trade is x0.973 — driven mainly by Williamson County labor rates and 65% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 panel upgrade | $1,900 – $6,600 |
| 1 panel upgrade | $1,900 – $6,600 |
| 1 panel upgrade | $1,900 – $6,600 |
| 1 panel upgrade | $1,900 – $6,600 |
| 1 panel upgrade | $1,900 – $6,600 |
Based on Round Rock pricing of $1,850–$6,600 per panel upgrade.
Cost by service scenario
Panel work is not one project. Swapping a panel on an existing service is a different job from raising the service capacity with the utility involved. Every row is priced against the Round Rock median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Like-for-like panel replacement | Same amperage, existing service and meter reused | $1,800 – $2,600 |
| 100A → 150A upgrade | New panel and breakers, service conductors evaluated | $2,600 – $3,600 |
| 100A → 200A service upgrade | New panel, meter base, grounding and utility reconnect | $3,300 – $4,600 |
| 200A upgrade with mast/service entrance work | New riser or weatherhead, exterior conductors replaced | $4,300 – $5,900 |
| 400A service | Large home, dual panels or subpanel feed | $6,300 – $8,900 |
- • The utility, not the electrician, controls the disconnect and reconnect window — schedule slippage here is the usual cause of a two-day job becoming a week.
- • Meter base replacement, grounding electrode upgrades and bonding to water and gas are routinely quoted separately; ask for them line by line.
- • Federal Pacific, Zinsco and fuse panels are commonly flagged by insurers and four-point inspections, which is why many replacements are not optional.
- • Overhead-to-underground conversions add trenching and are priced by the foot.
- • If an EV charger, heat pump or solar is coming, size the service for it now — the second trip repeats the permit, the inspection and the utility coordination.
Basis: Each scope is priced as a multiple of the modeled Round Rock median for electrical panel replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Where the money goes
- Labor
- $2,000
- 57% of median
- Materials
- $1,300
- 37% of median
- Permit & fees
- $230
- 7% of median
Round Rock project costs-3% vs U.S. average
Based on Williamson County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Round Rock building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work, 1-4 weeks including utility coordination
05
Inspection
Utility disconnect coordination, Rough electrical, Final electrical inspection
06
Closeout
Final sign-off, warranty and documentation
Round Rock labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$82–$107
Electrical crews in Williamson County · -6% vs U.S. ($100/hr)
Typical crew
2 × 1.5 days
On-site time for a typical panel job here.
Labor in the price
$2,000
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Round Rock wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national electrical crew rates adjusted by the Williamson County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Round Rock differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$125
Williamson County crews price 6% below the national average, and labor is 60% of this job.
Code and inspection load+$50
Electrical Panel Replacement carries 65% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.
Basis: Decomposition of the modeled Round Rock median against the U.S. median for this scope. · City of Round Rock building department, Hometriva methodology
Round Rock vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated electrical panel replacement in Round Rock
$3,530
Likely range $2,030 – $6,830
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Service size: 100A, 150A or 200A
- Meter can and service entrance conductor replacement
- Overhead versus underground service
- Surge protection and AFCI/GFCI breaker requirements
- Utility disconnect and reconnect scheduling
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Round Rock building departmentModeled estimate |
| electrical | City of Round Rock building departmentModeled estimate |
| mechanical | City of Round Rock building departmentModeled estimate |
| plumbing | City of Round Rock building departmentModeled estimate |
| zoning | City of Round Rock building departmentModeled estimate |
| fire | City of Round Rock building departmentModeled estimate |
Permit requirement in Round Rock
Yes — a permit is required for electrical panel replacement in Round Rock, TX. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Round Rock building departmentModeled estimate
- Permit fee
- Estimated allowance $95–$360Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Utility disconnect coordination
- Rough electrical
- Final electrical inspection
Local conditions that change this job
Only the exposures that materially affect electrical panel replacement.
Named-storm exposure
High70/100
Flood zone exposure
Moderate50/100
Coastal / salt-air exposure
Moderate45/100
Round Rock sits in Williamson County, Texas. Hail and high straight-line winds are the dominant loss driver, so impact-rated roofing and insurance-funded replacement shape local pricing. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
50,572
Approximate household count in Round Rock, used to size the contractor pool for this trade.
Permit activity index
x0.95
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per panel upgrade |
|---|---|---|---|
| Round Rock (this page) | x0.973 | $3,300 | $1,850 – $6,600 |
| El Paso | x1.027 | $3,500 | $1,950 – $7,000 |
| Arlington | x1.027 | $3,500 | $1,950 – $7,000 |
| Corpus Christi | x0.999 | $3,400 | $1,900 – $6,800 |
What Round Rock homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Round Rock
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Round Rock panel costs
Hometriva does not publish invented city prices. The Round Rock estimate for electrical panel replacement is produced by this chain, and every input is stored separately:
- National baseline$3,400
Typical U.S. cost for electrical panel replacement on a single-family home.
- Local labor factorx0.935
Round Rock-area trade labor rates, weighted at 60% of this job.
- Material factorx0.988
Material and delivery pricing into Williamson County, weighted at 40%.
- Regulatory factorx1.027
Local code, product-approval and inspection load, applied at 65% for this project type.
- Applied multiplierx0.973
Blended Round Rock adjustment specific to electrical panel replacement.
- Permit component$95 – $360
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, electrical panel replacement in Round Rock carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for electrical panel replacement pricing in Round Rock, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to replace an electrical panel?
Yes, always. An electrical permit is required, a licensed electrical contractor must perform the work in most Florida jurisdictions, and the utility will not reconnect service until the final inspection passes.
How long does a panel upgrade take?
The physical work is usually one day with power off for 4-8 hours. Utility disconnect scheduling and inspection generally stretch the total to one to four weeks.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.