Electrical Panel Replacement cost in Everett, WA
Everett, WA · updated August 2026
$4,200
Typical local cost
$2,300 – $8,400
Typical range
- per panel upgrade
- $2,350 – $8,400
- Permit
- Yes
- Typical timeline
- 1 day of work
Installed, local pricing
$115 – $435 in fees
1 day of work, 1-4 weeks including utility coordination
Everett runs +23% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Everett homeowners pay around $4,200. The local adjustment for this trade is x1.232 — driven mainly by Snohomish County labor rates and 65% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 panel upgrade | $2,400 – $8,400 |
| 1 panel upgrade | $2,400 – $8,400 |
| 1 panel upgrade | $2,400 – $8,400 |
| 1 panel upgrade | $2,400 – $8,400 |
| 1 panel upgrade | $2,400 – $8,400 |
Based on Everett pricing of $2,350–$8,400 per panel upgrade.
Cost by service scenario
Panel work is not one project. Swapping a panel on an existing service is a different job from raising the service capacity with the utility involved. Every row is priced against the Everett median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Like-for-like panel replacement | Same amperage, existing service and meter reused | $2,300 – $3,400 |
| 100A → 150A upgrade | New panel and breakers, service conductors evaluated | $3,400 – $4,600 |
| 100A → 200A service upgrade | New panel, meter base, grounding and utility reconnect | $4,200 – $5,900 |
| 200A upgrade with mast/service entrance work | New riser or weatherhead, exterior conductors replaced | $5,500 – $7,600 |
| 400A service | Large home, dual panels or subpanel feed | $8,000 – $11,300 |
- • The utility, not the electrician, controls the disconnect and reconnect window — schedule slippage here is the usual cause of a two-day job becoming a week.
- • Meter base replacement, grounding electrode upgrades and bonding to water and gas are routinely quoted separately; ask for them line by line.
- • Federal Pacific, Zinsco and fuse panels are commonly flagged by insurers and four-point inspections, which is why many replacements are not optional.
- • Overhead-to-underground conversions add trenching and are priced by the foot.
- • If an EV charger, heat pump or solar is coming, size the service for it now — the second trip repeats the permit, the inspection and the utility coordination.
Basis: Each scope is priced as a multiple of the modeled Everett median for electrical panel replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Where the money goes
- Labor
- $2,500
- 56% of median
- Materials
- $1,700
- 38% of median
- Permit & fees
- $275
- 6% of median
Everett project costs+23% vs U.S. average
Based on Snohomish County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Everett building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work, 1-4 weeks including utility coordination
05
Inspection
Utility disconnect coordination, Rough electrical, Final electrical inspection
06
Closeout
Final sign-off, warranty and documentation
Everett labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$106–$138
Electrical crews in Snohomish County · +21% vs U.S. ($100/hr)
Typical crew
2 × 1.5 days
On-site time for a typical panel job here.
Labor in the price
$2,500
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Everett wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national electrical crew rates adjusted by the Snohomish County labor factor (x1.208). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Everett differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$425
Snohomish County crews price 21% above the national average, and labor is 60% of this job.
Code and inspection load+$200
Electrical Panel Replacement carries 65% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.
Material and delivery+$150
Materials are nationally traded, so they move less — but delivery into this market runs 10% over baseline.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Everett median against the U.S. median for this scope. · City of Everett building department, Hometriva methodology
Everett vs Washington vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated electrical panel replacement in Everett
$4,475
Likely range $2,575 – $8,675
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Service size: 100A, 150A or 200A
- Meter can and service entrance conductor replacement
- Overhead versus underground service
- Surge protection and AFCI/GFCI breaker requirements
- Utility disconnect and reconnect scheduling
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Everett building departmentModeled estimate |
| electrical | City of Everett building departmentModeled estimate |
| mechanical | City of Everett building departmentModeled estimate |
| plumbing | City of Everett building departmentModeled estimate |
| zoning | City of Everett building departmentModeled estimate |
| fire | City of Everett building departmentModeled estimate |
Permit requirement in Everett
Yes — a permit is required for electrical panel replacement in Everett, WA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Everett building departmentModeled estimate
- Permit fee
- Estimated allowance $115–$435Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Utility disconnect coordination
- Rough electrical
- Final electrical inspection
Local conditions that change this job
Only the exposures that materially affect electrical panel replacement.
Named-storm exposure
High70/100
Flood zone exposure
Moderate50/100
Coastal / salt-air exposure
Moderate45/100
Everett sits in Snohomish County, Washington. Persistent rainfall and moisture management dominate exterior detailing, while seismic provisions apply to structural and foundation work. Work outside city limits is permitted by the county building department rather than the city.
Owner-occupied homes
0%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
44,252
Approximate household count in Everett, used to size the contractor pool for this trade.
Permit activity index
x1.15
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
What Everett homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Everett
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Everett panel costs
Hometriva does not publish invented city prices. The Everett estimate for electrical panel replacement is produced by this chain, and every input is stored separately:
- National baseline$3,400
Typical U.S. cost for electrical panel replacement on a single-family home.
- Local labor factorx1.208
Everett-area trade labor rates, weighted at 60% of this job.
- Material factorx1.105
Material and delivery pricing into Snohomish County, weighted at 40%.
- Regulatory factorx1.086
Local code, product-approval and inspection load, applied at 65% for this project type.
- Applied multiplierx1.232
Blended Everett adjustment specific to electrical panel replacement.
- Permit component$115 – $435
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, electrical panel replacement in Everett carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for electrical panel replacement pricing in Everett, WA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to replace an electrical panel?
Yes, always. An electrical permit is required, a licensed electrical contractor must perform the work in most Florida jurisdictions, and the utility will not reconnect service until the final inspection passes.
How long does a panel upgrade take?
The physical work is usually one day with power off for 4-8 hours. Utility disconnect scheduling and inspection generally stretch the total to one to four weeks.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.