EV Charger Installation cost in Biloxi, MS

Biloxi, MS · updated August 2026

$1,300

Typical local cost

$600 – $3,400

Typical range

per Level 2 charger installed
$650 – $3,400

Installed, local pricing

Permit
Yes

$60 – $190 in fees

Typical timeline
Half a day of work

Half a day of work, 1-3 weeks including permit and inspection

Biloxi runs -19% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Biloxi is $1,300. The local adjustment for this trade is x0.812 — driven mainly by Harrison County labor rates and 55% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
Short run (under 25 ft)$500$2,600
Standard run (25–50 ft)$600$3,400
Long run (50–100 ft)$800$4,800
Run plus panel capacity work$1,100$6,100

Based on Biloxi pricing of $650–$3,400 per level 2 charger installed.

Where the money goes

Labor
$800
56% of median
Materials
$500
35% of median
Permit & fees
$125
9% of median

Biloxi project costs-19% vs U.S. average

Based on Harrison County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Biloxi building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    Half a day of work, 1-3 weeks including permit and inspection

  5. 05

    Inspection

    Electrical rough where concealed, Final electrical inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Biloxi labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$67–$87

Electrical crews in Harrison County · -23% vs U.S. ($100/hr)

Typical crew

2 × 0.5 days

On-site time for a typical ev charger job here.

Labor in the price

$800

60% of the median — the rest is material, disposal and permit.

Because labor is 60% of this job, Biloxi wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national electrical crew rates adjusted by the Harrison County labor factor (x0.766). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Biloxi differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$225Material and delivery$50Permit fees$50Code and inspection load$25
Dollars of the Biloxi difference owned by each driver, versus the U.S. median for ev charger installation.
  • Trade labor rates-$225

    Harrison County crews price 23% below the national average, and labor is 60% of this job.

  • Material and delivery-$50

    Materials are nationally traded, so they move less — but delivery into this market runs 8% under baseline.

  • Permit fees-$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

  • Code and inspection load-$25

    EV Charger Installation carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x0.97.

Basis: Decomposition of the modeled Biloxi median against the U.S. median for this scope. · City of Biloxi building department, Hometriva methodology

Biloxi vs Mississippi vs the U.S.

Biloxi$600$3,400Mississippi average$700$3,600U.S. average$800$4,200
Modeled ranges for ev charger installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated ev charger installation in Biloxi

$1,425

Likely range $725$3,525

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Distance from the panel to the charger
  • Available panel capacity and any needed upgrade
  • Hardwired versus NEMA 14-50 outlet
  • Trenching for detached garages

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Biloxi building departmentModeled estimate
electricalCity of Biloxi building departmentModeled estimate
mechanicalCity of Biloxi building departmentModeled estimate
plumbingCity of Biloxi building departmentModeled estimate
zoningCity of Biloxi building departmentModeled estimate
fireCity of Biloxi building departmentModeled estimate

Permit requirement in Biloxi

Yes — a permit is required for ev charger installation in Biloxi, MS. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Biloxi building departmentModeled estimate
Permit fee
Estimated allowance $60$190Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Electrical rough where concealed
  2. Final electrical inspection
Full Biloxi permit guide for ev charger installation

Local conditions that change this job

Only the exposures that materially affect ev charger installation.

Humidity

Severe84/100

Biloxi sits in Harrison County, Mississippi. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer Level 2 charger installed
Biloxi (this page)x0.812$1,300$650$3,400
Gulfportx0.848$1,400$700$3,550
Mobilex0.930$1,500$750$3,900
Hattiesburgx0.812$1,300$650$3,400

What Biloxi homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Biloxi

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Biloxi ev charger costs

Hometriva does not publish invented city prices. The Biloxi estimate for ev charger installation is produced by this chain, and every input is stored separately:

  1. National baseline$1,650

    Typical U.S. cost for ev charger installation on a single-family home.

  2. Local labor factorx0.766

    Biloxi-area trade labor rates, weighted at 60% of this job.

  3. Material factorx0.915

    Material and delivery pricing into Harrison County, weighted at 40%.

  4. Regulatory factorx0.969

    Local code, product-approval and inspection load, applied at 55% for this project type.

  5. Applied multiplierx0.812

    Blended Biloxi adjustment specific to ev charger installation.

  6. Permit component$60 – $190

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, ev charger installation in Biloxi carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for ev charger installation pricing in Biloxi, MS.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for ev charger installation in Biloxi, MS?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does ev charger installation take?

Half a day of work, 1-3 weeks including permit and inspection. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are distance from the panel to the charger; available panel capacity and any needed upgrade; hardwired versus nema 14-50 outlet.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages