Exterior Door Replacement cost in Melbourne, FL
Melbourne, FL · updated August 2026
$2,500
Typical local cost
$900 – $6,700
Typical range
- per door installed
- $950 – $4,350
- Permit
- Usually yes
- Typical timeline
- Half a day to one day of work
Installed, local pricing
$90 – $295 in fees
Half a day to one day of work, 2-5 weeks with permitting
Melbourne runs +3% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Melbourne is $2,500. The local adjustment for this trade is x1.035 — driven mainly by Brevard County labor rates and 70% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 door | $900 – $6,700 |
| 2 doors | $1,700 – $12,700 |
| 3 doors | $2,500 – $18,800 |
Based on Melbourne pricing of $950–$4,350 per door installed.
Where the money goes
- Labor
- $1,400
- 52% of median
- Materials
- $1,100
- 41% of median
- Permit & fees
- $195
- 7% of median
Melbourne project costs+3% vs U.S. average
Based on Brevard County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Melbourne building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
Half a day to one day of work, 2-5 weeks with permitting
05
Inspection
Installation and attachment, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Melbourne labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$59–$77
Exterior crews in Brevard County · -1% vs U.S. ($68/hr)
Typical crew
2 × 1.5 days
On-site time for a typical exterior door job here.
Labor in the price
$1,400
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Melbourne wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Brevard County labor factor (x0.987). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Melbourne differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$75
Exterior Door Replacement carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Basis: Decomposition of the modeled Melbourne median against the U.S. median for this scope. · City of Melbourne building department, Hometriva methodology
Melbourne vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated exterior door replacement in Melbourne
$2,695
Likely range $1,095 – $6,895
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Door material: steel, fiberglass or wood
- Impact rating and glass area
- Whether the frame and threshold are replaced
- Sidelights and transoms
- Hardware and smart lock upgrades
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Melbourne building departmentModeled estimate |
| electrical | City of Melbourne building departmentModeled estimate |
| mechanical | City of Melbourne building departmentModeled estimate |
| plumbing | City of Melbourne building departmentModeled estimate |
| zoning | City of Melbourne building departmentModeled estimate |
| fire | City of Melbourne building departmentModeled estimate |
Permit requirement in Melbourne
In most cases yes — Brevard County and the City of Melbourne generally require a permit for exterior door replacement. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Melbourne building departmentModeled estimate
- Permit fee
- Estimated allowance $90–$295Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Installation and attachment
- Final inspection
Local conditions that change this job
Only the exposures that materially affect exterior door replacement.
Design wind speed exposure
Severe84/100
Named-storm exposure
Severe84/100
Coastal / salt-air exposure
Severe82/100
Brevard County design wind speeds step up sharply toward the barrier island.
Nearby market comparison
| Market | Local factor | Median | Per door installed |
|---|---|---|---|
| Melbourne (this page) | x1.035 | $2,500 | $950 – $4,350 |
| Kissimmee | x0.998 | $2,400 | $900 – $4,200 |
| Port St. Lucie | x1.080 | $2,600 | $950 – $4,550 |
| Orlando | x1.047 | $2,500 | $950 – $4,400 |
What Melbourne homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Melbourne
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Melbourne exterior door costs
Hometriva does not publish invented city prices. The Melbourne estimate for exterior door replacement is produced by this chain, and every input is stored separately:
- National baseline$2,400
Typical U.S. cost for exterior door replacement on a single-family home.
- Local labor factorx0.987
Melbourne-area trade labor rates, weighted at 55% of this job.
- Material factorx1.023
Material and delivery pricing into Brevard County, weighted at 45%.
- Regulatory factorx1.045
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx1.035
Blended Melbourne adjustment specific to exterior door replacement.
- Permit component$90 – $295
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, exterior door replacement in Melbourne carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for exterior door replacement pricing in Melbourne, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to replace a front door in Florida?
Most Florida jurisdictions require a permit when the door frame is replaced, because the opening's wind-borne debris protection changes. A slab-only swap in the existing frame is sometimes exempt — confirm with your building department.
How long does exterior door replacement take?
Half a day to one day of work, 2-5 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are door material: steel, fiberglass or wood; impact rating and glass area; whether the frame and threshold are replaced.
Sources
Sources & verification
- City of Melbourne building department
- Melbourne permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.