Exterior Door Replacement cost in Santa Fe, NM
Santa Fe, NM · updated August 2026
$2,300
Typical local cost
$900 – $6,200
Typical range
- per door installed
- $850 – $4,000
- Permit
- Usually yes
- Typical timeline
- Half a day to one day of work
Installed, local pricing
$80 – $265 in fees
Half a day to one day of work, 2-5 weeks with permitting
Santa Fe runs -5% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Santa Fe is $2,300. The local adjustment for this trade is x0.954 — driven mainly by Santa Fe County labor rates and 70% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 door | $900 – $6,200 |
| 2 doors | $1,700 – $11,800 |
| 3 doors | $2,500 – $17,400 |
Based on Santa Fe pricing of $850–$4,000 per door installed.
Where the money goes
- Labor
- $1,300
- 53% of median
- Materials
- $1,000
- 40% of median
- Permit & fees
- $175
- 7% of median
Santa Fe project costs-5% vs U.S. average
Based on Santa Fe County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Santa Fe building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
Half a day to one day of work, 2-5 weeks with permitting
05
Inspection
Installation and attachment, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Santa Fe labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$55–$71
Exterior crews in Santa Fe County · -8% vs U.S. ($68/hr)
Typical crew
2 × 1.5 days
On-site time for a typical exterior door job here.
Labor in the price
$1,300
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Santa Fe wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Santa Fe County labor factor (x0.922). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Santa Fe differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$100
Santa Fe County crews price 8% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Santa Fe median against the U.S. median for this scope. · City of Santa Fe building department, Hometriva methodology
Santa Fe vs New Mexico vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated exterior door replacement in Santa Fe
$2,475
Likely range $1,075 – $6,375
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Door material: steel, fiberglass or wood
- Impact rating and glass area
- Whether the frame and threshold are replaced
- Sidelights and transoms
- Hardware and smart lock upgrades
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Santa Fe building departmentModeled estimate |
| electrical | City of Santa Fe building departmentModeled estimate |
| mechanical | City of Santa Fe building departmentModeled estimate |
| plumbing | City of Santa Fe building departmentModeled estimate |
| zoning | City of Santa Fe building departmentModeled estimate |
| fire | City of Santa Fe building departmentModeled estimate |
Permit requirement in Santa Fe
In most cases yes — Santa Fe County and the City of Santa Fe generally require a permit for exterior door replacement. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Santa Fe building departmentModeled estimate
- Permit fee
- Estimated allowance $80–$265Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Installation and attachment
- Final inspection
Local conditions that change this job
Only the exposures that materially affect exterior door replacement.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Coastal / salt-air exposure
Moderate45/100
Nearby market comparison
| Market | Local factor | Median | Per door installed |
|---|---|---|---|
| Santa Fe (this page) | x0.954 | $2,300 | $850 – $4,000 |
| Rio Rancho | x0.954 | $2,300 | $850 – $4,000 |
| Albuquerque | x0.941 | $2,300 | $850 – $3,950 |
| Farmington | x0.915 | $2,200 | $800 – $3,850 |
What Santa Fe homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Santa Fe
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Santa Fe exterior door costs
Hometriva does not publish invented city prices. The Santa Fe estimate for exterior door replacement is produced by this chain, and every input is stored separately:
- National baseline$2,400
Typical U.S. cost for exterior door replacement on a single-family home.
- Local labor factorx0.922
Santa Fe-area trade labor rates, weighted at 55% of this job.
- Material factorx0.982
Material and delivery pricing into Santa Fe County, weighted at 45%.
- Regulatory factorx1.007
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx0.954
Blended Santa Fe adjustment specific to exterior door replacement.
- Permit component$80 – $265
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, exterior door replacement in Santa Fe carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for exterior door replacement pricing in Santa Fe, NM.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does exterior door replacement take?
Half a day to one day of work, 2-5 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are door material: steel, fiberglass or wood; impact rating and glass area; whether the frame and threshold are replaced.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.