Fence Installation cost in Tempe, AZ
Tempe, AZ · updated August 2026
$5,300
Typical local cost
$2,500 – $11,500
Typical range
- per linear foot installed
- $18.50 – $64.50
- Permit
- Usually yes
- Typical timeline
- 1-3 days of work
Installed, local pricing
$60 – $245 in fees
1-3 days of work, 1-4 weeks including permitting
Tempe runs +4% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Tempe homeowners pay around $5,300. The local adjustment for this trade is x1.041 — driven mainly by Maricopa County labor rates and 40% exposure to local code requirements.
Estimate your Tempe job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$6,572 – $9,712
Installed, including gates and permit
- Cost per linear foot
- $33 – $49
- Gate allowance
- $840
- Posts required (8 ft spacing)
- 26 posts
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 75 linear foot installed | $1,400 – $4,800 |
| 100 linear foot installed | $1,900 – $6,500 |
| 125 linear foot installed | $2,300 – $8,100 |
| 175 linear foot installed | $3,200 – $11,300 |
| 225 linear foot installed | $4,200 – $14,500 |
Based on Tempe pricing of $19–$65 per linear foot installed.
Cost by fence run
Fencing is priced per linear foot, then adjusted for height, gates, terrain and demolition of the old fence. Every row is priced against the Tempe median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| 50 linear feet | Short side yard run, one walk gate | $1,900 – $2,700 |
| 100 linear feet | Typical single-side or partial enclosure | $3,200 – $4,500 |
| 150 linear feet | Standard back-yard enclosure | $4,500 – $6,100 |
| 200 linear feet | Full perimeter on a quarter-acre lot, two gates | $5,800 – $8,000 |
| 300 linear feet | Large lot or corner lot, drive gate included | $8,500 – $11,700 |
- • Height changes price more than length: a 6 ft privacy fence uses roughly a third more material per foot than a 4 ft one.
- • Gates are priced individually — a drive gate typically costs more than 20 feet of fence.
- • Corner lots and pool enclosures are where local rules bite: sight-triangle limits, setbacks and self-closing, self-latching pool-barrier hardware.
- • Sloped or rocky ground adds stepped panels or extra post depth, both billed as labor.
Basis: Each scope is priced as a multiple of the modeled Tempe median for fence installation, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Pressure-Treated Wood Fence | $3,700 – $5,600 | 10–20 yrs | High |
| Vinyl Fence | $5,800 – $9,000 | 25–35 yrs | Very low |
| Aluminum Fence | $5,300 – $8,500 | 30–50 yrs | Very low |
| Chain Link Fence | $2,200 – $3,800 | 15–25 yrs | Low |
| Composite Fence | $7,400 – $11,700 | 25–30 yrs | Low |
Where the money goes
- Labor
- $2,900
- 53% of median
- Materials
- $2,400
- 44% of median
- Permit & fees
- $155
- 3% of median
Tempe project costs+4% vs U.S. average
Based on Maricopa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Tempe building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days of work, 1-4 weeks including permitting
05
Inspection
Setback / location check in some jurisdictions, Final fence inspection
06
Closeout
Final sign-off, warranty and documentation
Tempe labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$61–$80
Exterior crews in Maricopa County · +3% vs U.S. ($68/hr)
Typical crew
2 × 2.5 days
On-site time for a typical fence job here.
Labor in the price
$2,900
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Tempe wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Maricopa County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Tempe differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$75
Fence Installation carries 40% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Trade labor rates+$75
Maricopa County crews price 3% above the national average, and labor is 55% of this job.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 3% over baseline.
Basis: Decomposition of the modeled Tempe median against the U.S. median for this scope. · City of Tempe building department, Hometriva methodology
Tempe vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated fence installation in Tempe
$5,455
Likely range $2,655 – $11,655
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of gates
- Material: chain link, wood, vinyl, aluminum or composite
- Fence height (4 ft front yard versus 6 ft rear yard)
- Post depth and concrete required for wind loads
- Grading, tree roots and old fence removal
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Tempe building departmentModeled estimate |
| electrical | City of Tempe building departmentModeled estimate |
| mechanical | City of Tempe building departmentModeled estimate |
| plumbing | City of Tempe building departmentModeled estimate |
| zoning | City of Tempe building departmentModeled estimate |
| fire | City of Tempe building departmentModeled estimate |
Permit requirement in Tempe
In most cases yes — Maricopa County and the City of Tempe generally require a permit for fence installation. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Tempe building departmentModeled estimate
- Permit fee
- Estimated allowance $60–$245Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Setback / location check in some jurisdictions
- Final fence inspection
Local conditions that change this job
Only the exposures that materially affect fence installation.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Humidity
Severe84/100
Tempe sits in Maricopa County, Arizona. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
What Tempe homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Tempe
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Tempe fence costs
Hometriva does not publish invented city prices. The Tempe estimate for fence installation is produced by this chain, and every input is stored separately:
- National baseline$5,100
Typical U.S. cost for fence installation on a single-family home.
- Local labor factorx1.026
Tempe-area trade labor rates, weighted at 55% of this job.
- Material factorx1.027
Material and delivery pricing into Maricopa County, weighted at 45%.
- Regulatory factorx1.036
Local code, product-approval and inspection load, applied at 40% for this project type.
- Applied multiplierx1.041
Blended Tempe adjustment specific to fence installation.
- Permit component$60 – $245
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, fence installation in Tempe carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for fence installation pricing in Tempe, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How tall can a fence be in Florida?
There is no single statewide fence height limit. Most Florida jurisdictions allow up to 6 feet in side and rear yards and limit front-yard fences to 3-4 feet, with a corner visibility triangle kept clear. Pool barriers have their own minimum of 4 feet under the Florida Building Code.
Do I need a survey to get a fence permit?
Most Florida building departments require a current property survey or a site plan drawn on a survey showing the proposed fence line, so the reviewer can confirm setbacks and that the fence is on your property.
Can I install my own fence?
Yes. Fencing is one of the more DIY-friendly exterior projects and homeowners can generally pull their own fence permit. You are still responsible for property line accuracy, HOA approval and pool barrier compliance.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.