Fence Installation cost in Lewiston, ME

Lewiston, ME · updated August 2026

$5,300

Typical local cost

$2,500 – $11,400

Typical range

per linear foot installed
$18.50 – $64

Installed, local pricing

Permit
Usually yes

$50 – $215 in fees

Typical timeline
1-3 days of work

1-3 days of work, 1-4 weeks including permitting

Calculate my fence cost

Lewiston runs +3% against the U.S. average · data confidence High · modeled estimate, not a quote

The modeled midpoint for Lewiston is $5,300. The local adjustment for this trade is x1.035 — driven mainly by Androscoggin County labor rates and 40% exposure to local code requirements.

Estimate your Lewiston job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Estimated total cost

$6,802 – $10,052

Installed, including gates and permit

Cost per linear foot
$34 – $51
Gate allowance
$869
Posts required (8 ft spacing)
26 posts

Priced for Lewiston (local adjustment x1.035).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
75 linear foot installed$1,400 – $4,800
100 linear foot installed$1,900 – $6,400
125 linear foot installed$2,300 – $8,000
175 linear foot installed$3,200 – $11,200
225 linear foot installed$4,200 – $14,400

Based on Lewiston pricing of $19–$64 per linear foot installed.

Cost by fence run

Fencing is priced per linear foot, then adjusted for height, gates, terrain and demolition of the old fence. Every row is priced against the Lewiston median.

ScopeWhat it includesTypical installed cost
50 linear feetShort side yard run, one walk gate$1,900 – $2,700
100 linear feetTypical single-side or partial enclosure$3,200 – $4,500
150 linear feetStandard back-yard enclosure$4,500 – $6,100
200 linear feetFull perimeter on a quarter-acre lot, two gates$5,800 – $8,000
300 linear feetLarge lot or corner lot, drive gate included$8,500 – $11,700
  • • Height changes price more than length: a 6 ft privacy fence uses roughly a third more material per foot than a 4 ft one.
  • • Gates are priced individually — a drive gate typically costs more than 20 feet of fence.
  • • Corner lots and pool enclosures are where local rules bite: sight-triangle limits, setbacks and self-closing, self-latching pool-barrier hardware.
  • • Sloped or rocky ground adds stepped panels or extra post depth, both billed as labor.

Basis: Each scope is priced as a multiple of the modeled Lewiston median for fence installation, so the scenarios, the size table and the calculator always agree. · Hometriva methodology

Cost by material

Installed cost in this market, with expected service life.

MaterialInstalled rangeLifespanMaintenance
Pressure-Treated Wood Fence$3,700 – $5,60010–20 yrsHigh
Vinyl Fence$5,800 – $9,00025–35 yrsVery low
Aluminum Fence$5,300 – $8,50030–50 yrsVery low
Chain Link Fence$2,200 – $3,80015–25 yrsLow
Composite Fence$7,400 – $11,70025–30 yrsLow

Where the money goes

Labor
$2,900
53% of median
Materials
$2,400
44% of median
Permit & fees
$135
2% of median

Lewiston project costs+3% vs U.S. average

Based on Androscoggin County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Lewiston building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of work, 1-4 weeks including permitting

  5. 05

    Inspection

    Setback / location check in some jurisdictions, Final fence inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Lewiston labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$62–$81

Exterior crews in Androscoggin County · +4% vs U.S. ($68/hr)

Typical crew

2 × 2.5 days

On-site time for a typical fence job here.

Labor in the price

$2,900

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Lewiston wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Androscoggin County labor factor (x1.039). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Lewiston differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$100Material and delivery$75
Dollars of the Lewiston difference owned by each driver, versus the U.S. median for fence installation.
  • Trade labor rates+$100

    Androscoggin County crews price 4% above the national average, and labor is 55% of this job.

  • Material and delivery+$75

    Materials are nationally traded, so they move less — but delivery into this market runs 3% over baseline.

Basis: Decomposition of the modeled Lewiston median against the U.S. median for this scope. · City of Lewiston building department, Hometriva methodology

Lewiston vs Maine vs the U.S.

Lewiston$2,500–$11,400Maine average$2,600–$11,800U.S. average$2,400–$11,000
Modeled ranges for fence installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated fence installation in Lewiston

$5,435

Likely range $2,635 – $11,535

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Linear footage and number of gates
  • Material: chain link, wood, vinyl, aluminum or composite
  • Fence height (4 ft front yard versus 6 ft rear yard)
  • Post depth and concrete required for wind loads
  • Grading, tree roots and old fence removal

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Lewiston building departmentModeled estimate
electricalCity of Lewiston building departmentModeled estimate
mechanicalCity of Lewiston building departmentModeled estimate
plumbingCity of Lewiston building departmentModeled estimate
zoningCity of Lewiston building departmentModeled estimate
fireCity of Lewiston building departmentModeled estimate

Permit requirement in Lewiston

In most cases yes — Androscoggin County and the City of Lewiston generally require a permit for fence installation. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.

Permitting authority
City of Lewiston building departmentModeled estimate
Permit fee
Estimated allowance $50–$215Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Setback / location check in some jurisdictions
  2. Final fence inspection
Full Lewiston permit guide for fence installation →

Local conditions that change this job

Only the exposures that materially affect fence installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Humidity

Severe84/100

Lewiston sits in Androscoggin County, Maine. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer linear foot installed
Lewiston (this page)x1.035$5,300$18.50 – $64
Augustax1.035$5,300$18.50 – $64
Portlandx1.070$5,500$19.50 – $66.50
Doverx1.077$5,500$19.50 – $67
+ Had fence installation done in Lewiston? Add what you paid or were quoted

Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.

No name, email or address is collected. Reports are reviewed before they count.
No name, email or address is collected.

How Hometriva estimates Lewiston fence costs

Hometriva does not publish invented city prices. The Lewiston estimate for fence installation is produced by this chain, and every input is stored separately:

  1. National baseline$5,100

    Typical U.S. cost for fence installation on a single-family home.

  2. Local labor factorx1.039

    Lewiston-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.033

    Material and delivery pricing into Androscoggin County, weighted at 45%.

  4. Regulatory factorx0.998

    Local code, product-approval and inspection load, applied at 40% for this project type.

  5. Applied multiplierx1.035

    Blended Lewiston adjustment specific to fence installation.

  6. Permit component$50 – $215

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, fence installation in Lewiston carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for fence installation pricing in Lewiston, ME.

  • • National unit-cost baselines against current trade pricing
  • • Local labor and materials factors for the market
  • • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Can I install my own fence?

Yes. Fencing is one of the more DIY-friendly exterior projects and homeowners can generally pull their own fence permit. You are still responsible for property line accuracy, HOA approval and pool barrier compliance.

How long does fence installation take?

1-3 days of work, 1-4 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are linear footage and number of gates; material: chain link, wood, vinyl, aluminum or composite; fence height (4 ft front yard versus 6 ft rear yard).

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages