Fence Installation cost in Laramie, WY
Laramie, WY · updated August 2026
$4,800
Typical local cost
$2,300 – $10,400
Typical range
- per linear foot installed
- $17 – $58.50
- Permit
- Usually yes
- Typical timeline
- 1-3 days of work
Installed, local pricing
$45 – $190 in fees
1-3 days of work, 1-4 weeks including permitting
Laramie runs -5% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Laramie is $4,800. The local adjustment for this trade is x0.947 — driven mainly by Albany County labor rates and 40% exposure to local code requirements.
Estimate your Laramie job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$6,224 – $9,197
Installed, including gates and permit
- Cost per linear foot
- $31 – $46
- Gate allowance
- $795
- Posts required (8 ft spacing)
- 26 posts
Priced for Laramie (local adjustment x0.947).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 75 linear foot installed | $1,300 – $4,400 |
| 100 linear foot installed | $1,700 – $5,900 |
| 125 linear foot installed | $2,100 – $7,300 |
| 175 linear foot installed | $3,000 – $10,200 |
| 225 linear foot installed | $3,800 – $13,200 |
Based on Laramie pricing of $17–$59 per linear foot installed.
Cost by fence run
Fencing is priced per linear foot, then adjusted for height, gates, terrain and demolition of the old fence. Every row is priced against the Laramie median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| 50 linear feet | Short side yard run, one walk gate | $1,700 – $2,400 |
| 100 linear feet | Typical single-side or partial enclosure | $2,900 – $4,100 |
| 150 linear feet | Standard back-yard enclosure | $4,100 – $5,500 |
| 200 linear feet | Full perimeter on a quarter-acre lot, two gates | $5,300 – $7,200 |
| 300 linear feet | Large lot or corner lot, drive gate included | $7,700 – $10,600 |
- • Height changes price more than length: a 6 ft privacy fence uses roughly a third more material per foot than a 4 ft one.
- • Gates are priced individually — a drive gate typically costs more than 20 feet of fence.
- • Corner lots and pool enclosures are where local rules bite: sight-triangle limits, setbacks and self-closing, self-latching pool-barrier hardware.
- • Sloped or rocky ground adds stepped panels or extra post depth, both billed as labor.
Basis: Each scope is priced as a multiple of the modeled Laramie median for fence installation, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Pressure-Treated Wood Fence | $3,400 – $5,000 | 10–20 yrs | High |
| Vinyl Fence | $5,300 – $8,200 | 25–35 yrs | Very low |
| Aluminum Fence | $4,800 – $7,700 | 30–50 yrs | Very low |
| Chain Link Fence | $2,000 – $3,500 | 15–25 yrs | Low |
| Composite Fence | $6,700 – $10,600 | 25–30 yrs | Low |
Where the money goes
- Labor
- $2,600
- 53% of median
- Materials
- $2,200
- 45% of median
- Permit & fees
- $120
- 2% of median
Laramie project costs-5% vs U.S. average
Based on Albany County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Laramie building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 days of work, 1-4 weeks including permitting
05
Inspection
Setback / location check in some jurisdictions, Final fence inspection
06
Closeout
Final sign-off, warranty and documentation
Laramie labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$72
Exterior crews in Albany County · -6% vs U.S. ($68/hr)
Typical crew
2 × 2.5 days
On-site time for a typical fence job here.
Labor in the price
$2,600
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Laramie wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Albany County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Laramie differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$175
Albany County crews price 6% below the national average, and labor is 55% of this job.
Code and inspection load-$75
Fence Installation carries 40% exposure to local code requirements, and this jurisdiction's review load indexes at x0.97.
Permit fees-$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Material and delivery-$25
Materials are nationally traded, so they move less — but delivery into this market runs 1% under baseline.
Basis: Decomposition of the modeled Laramie median against the U.S. median for this scope. · City of Laramie building department, Hometriva methodology
Laramie vs Wyoming vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated fence installation in Laramie
$4,920
Likely range $2,420 – $10,520
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of gates
- Material: chain link, wood, vinyl, aluminum or composite
- Fence height (4 ft front yard versus 6 ft rear yard)
- Post depth and concrete required for wind loads
- Grading, tree roots and old fence removal
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Laramie building departmentModeled estimate |
| electrical | City of Laramie building departmentModeled estimate |
| mechanical | City of Laramie building departmentModeled estimate |
| plumbing | City of Laramie building departmentModeled estimate |
| zoning | City of Laramie building departmentModeled estimate |
| fire | City of Laramie building departmentModeled estimate |
Permit requirement in Laramie
In most cases yes — Albany County and the City of Laramie generally require a permit for fence installation. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Laramie building departmentModeled estimate
- Permit fee
- Estimated allowance $45–$190Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Setback / location check in some jurisdictions
- Final fence inspection
Local conditions that change this job
Only the exposures that materially affect fence installation.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per linear foot installed |
|---|---|---|---|
| Laramie (this page) | x0.947 | $4,800 | $17 – $58.50 |
| Cheyenne | x0.982 | $5,000 | $17.50 – $61 |
| Fort Collins | x1.126 | $5,700 | $20.50 – $70 |
| Greeley | x1.102 | $5,600 | $20 – $68.50 |
What Laramie homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Laramie
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Laramie fence costs
Hometriva does not publish invented city prices. The Laramie estimate for fence installation is produced by this chain, and every input is stored separately:
- National baseline$5,100
Typical U.S. cost for fence installation on a single-family home.
- Local labor factorx0.935
Laramie-area trade labor rates, weighted at 55% of this job.
- Material factorx0.988
Material and delivery pricing into Albany County, weighted at 45%.
- Regulatory factorx0.969
Local code, product-approval and inspection load, applied at 40% for this project type.
- Applied multiplierx0.947
Blended Laramie adjustment specific to fence installation.
- Permit component$45 – $190
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, fence installation in Laramie carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for fence installation pricing in Laramie, WY.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Can I install my own fence?
Yes. Fencing is one of the more DIY-friendly exterior projects and homeowners can generally pull their own fence permit. You are still responsible for property line accuracy, HOA approval and pool barrier compliance.
How long does fence installation take?
1-3 days of work, 1-4 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and number of gates; material: chain link, wood, vinyl, aluminum or composite; fence height (4 ft front yard versus 6 ft rear yard).
Sources
Sources & verification
- Wyoming Department of Fire Prevention and Electrical Safety
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.