Flat Roof Replacement cost in Houston, TX
Houston, TX · updated August 2026
$14,000
Typical local cost
$6,200 – $29,000
Typical range
- per sq ft of roof area
- $6 – $16.50
- Permit
- Yes
- Typical timeline
- 2-5 days of work
Installed, local pricing
$190 – $735 in fees
2-5 days of work, 2-6 weeks including permitting
Houston runs +4% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Houston homeowners pay around $14,000. The local adjustment for this trade is x1.036 — driven mainly by Harris County labor rates and 90% exposure to local code requirements.
Estimate your Houston job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Roofing squares needed
14.8
Includes 10% waste
- Roof area
- 1,344 sq ft
- Shingle bundles
- 45 bundles
- Underlayment rolls (4 sq)
- 4 rolls
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 700 sq ft of roof area | $4,200 – $11,600 |
| 1,000 sq ft of roof area | $6,000 – $16,500 |
| 1,200 sq ft of roof area | $7,200 – $19,800 |
| 1,600 sq ft of roof area | $9,600 – $26,400 |
| 2,100 sq ft of roof area | $12,600 – $34,700 |
Based on Houston pricing of $6–$17 per sq ft of roof area.
Cost by roof scope
Roof pricing moves on area, pitch, how many layers come off and what the deck looks like underneath. Every row is priced against the Houston median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Overlay on a simple ranch roof | Single layer, 4:12 pitch, no tear-off | $8,700 – $11,500 |
| Standard tear-off and replace | One layer removed, architectural shingle, walkable pitch | $11,900 – $16,100 |
| Two-layer tear-off | Extra removal and disposal, same footprint | $14,000 – $18,900 |
| Steep or cut-up roof | 8:12+ pitch, multiple valleys, dormers, staging | $17,500 – $23,800 |
| Replacement with deck repair | Partial resheathing found after tear-off | $16,100 – $22,400 |
- • Tear-off and disposal is priced per layer — quotes that omit a second layer are the most common source of change orders.
- • Decking is unknown until the old roof is off. Reputable quotes state a per-sheet resheathing price up front.
- • Pitch above 7:12 requires fall protection and slows the crew, which shows up as labor, not material.
Basis: Each scope is priced as a multiple of the modeled Houston median for flat roof replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Standing-Seam Metal Roof | $21,000 – $33,600 | 40–70 yrs | Very low |
| TPO Membrane | $11,900 – $17,500 | 18–25 yrs | Low |
Where the money goes
- Labor
- $7,700
- 53% of median
- Materials
- $6,300
- 44% of median
- Permit & fees
- $465
- 3% of median
Houston project costs+4% vs U.S. average
Based on Harris County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Houston building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 days of work, 2-6 weeks including permitting
05
Inspection
Dry-in inspection, In-progress attachment, Final roof inspection
06
Closeout
Final sign-off, warranty and documentation
Houston labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$74
Exterior crews in Harris County · -4% vs U.S. ($68/hr)
Typical crew
3 × 5 days
On-site time for a typical flat roof job here.
Labor in the price
$7,700
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Houston wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Harris County labor factor (x0.961). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Houston differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$750
Flat Roof Replacement carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.06.
Trade labor rates-$300
Harris County crews price 4% below the national average, and labor is 55% of this job.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline because of coastal logistics.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Houston median against the U.S. median for this scope. · City of Houston building department, Hometriva methodology
Houston vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated flat roof replacement in Houston
$14,465
Likely range $6,665 – $29,465
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Membrane type: modified bitumen, TPO or coating
- Tapered insulation to correct ponding
- Number of penetrations and curbs
- Tear-off layers
- Parapet and flashing detail work
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Houston building departmentModeled estimate |
| electrical | City of Houston building departmentModeled estimate |
| mechanical | City of Houston building departmentModeled estimate |
| plumbing | City of Houston building departmentModeled estimate |
| zoning | City of Houston building departmentModeled estimate |
| fire | City of Houston building departmentModeled estimate |
Permit requirement in Houston
Yes — a permit is required for flat roof replacement in Houston, TX. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Houston building departmentModeled estimate
- Permit fee
- Estimated allowance $190–$735Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Dry-in inspection
- In-progress attachment
- Final roof inspection
Local conditions that change this job
Only the exposures that materially affect flat roof replacement.
Cooling load / heat exposure
Severe86/100
Annual rainfall
Severe84/100
Named-storm exposure
Severe84/100
Solar irradiance
High74/100
Houston has no zoning but strict floodplain rules; elevation certificates and drainage review can gate additions and slab work.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of roof area |
|---|---|---|---|
| Houston (this page) | x1.036 | $14,000 | $6 – $16.50 |
| San Antonio | x0.962 | $13,000 | $6 – $15.50 |
| Dallas | x1.030 | $13,900 | $6 – $16.50 |
| New Orleans | x1.132 | $15,300 | $7 – $18 |
What Houston homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Houston
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Houston flat roof costs
Hometriva does not publish invented city prices. The Houston estimate for flat roof replacement is produced by this chain, and every input is stored separately:
- National baseline$13,500
Typical U.S. cost for flat roof replacement on a single-family home.
- Local labor factorx0.961
Houston-area trade labor rates, weighted at 55% of this job.
- Material factorx1.008
Material and delivery pricing into Harris County, weighted at 45%.
- Regulatory factorx1.061
Local code, product-approval and inspection load, applied at 90% for this project type.
- Applied multiplierx1.036
Blended Houston adjustment specific to flat roof replacement.
- Permit component$190 – $735
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, flat roof replacement in Houston carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for flat roof replacement pricing in Houston, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does a flat roof last in Florida?
Modified bitumen typically lasts 12 to 20 years in Florida, TPO 15 to 25 years, and silicone coating systems 10 to 15 years before recoating. Standing water shortens all of these.
Sources
Sources & verification
- City of Houston building department
- Houston permit portal
- Texas Department of Licensing and Regulation
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.