Foundation Repair cost in Dover, NH
Dover, NH · updated August 2026
$10,200
Typical local cost
$3,000 – $34,500
Typical range
- per pier or pile installed
- $950 – $3,250
- Permit
- Usually yes
- Typical timeline
- 2-7 days of work
Installed, local pricing
$85 – $695 in fees
2-7 days of work, 3-8 weeks including engineering and permitting
Dover runs +8% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Dover is $10,200. The local adjustment for this trade is x1.077 — driven mainly by Strafford County labor rates and 40% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 3 pier or pile installed | $2,900 – $9,800 |
| 4 pier or pile installed | $3,800 – $13,000 |
| 5 pier or pile installed | $4,800 – $16,300 |
| 6 pier or pile installed | $5,700 – $19,500 |
| 8 pier or pile installed | $7,600 – $26,000 |
Based on Dover pricing of $950–$3,250 per pier or pile installed.
Where the money goes
- Labor
- $5,600
- 53% of median
- Materials
- $4,600
- 43% of median
- Permit & fees
- $390
- 4% of median
Dover project costs+8% vs U.S. average
Based on Strafford County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Dover building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-7 days of work, 3-8 weeks including engineering and permitting
05
Inspection
Pier / pile installation inspection, Final structural inspection
06
Closeout
Final sign-off, warranty and documentation
Dover labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$79–$102
Structural crews in Strafford County · +9% vs U.S. ($82/hr)
Typical crew
3 × 2.5 days
On-site time for a typical foundation job here.
Labor in the price
$5,600
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Dover wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national structural crew rates adjusted by the Strafford County labor factor (x1.091). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Dover differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$475
Strafford County crews price 9% above the national average, and labor is 55% of this job.
Material and delivery+$225
Materials are nationally traded, so they move less — but delivery into this market runs 5% over baseline.
Permit fees-$50
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Dover median against the U.S. median for this scope. · City of Dover building department, Hometriva methodology
Dover vs New Hampshire vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated foundation repair in Dover
$10,590
Likely range $3,390 – $34,890
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of piers and the depth to load-bearing soil
- Push piers, helical piers, slab jacking or wall anchors
- Engineering, soil testing and survey work
- Access for equipment and interior versus exterior work
- Drainage or plumbing leak correction that caused the movement
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Dover building departmentModeled estimate |
| electrical | City of Dover building departmentModeled estimate |
| mechanical | City of Dover building departmentModeled estimate |
| plumbing | City of Dover building departmentModeled estimate |
| zoning | City of Dover building departmentModeled estimate |
| fire | City of Dover building departmentModeled estimate |
Permit requirement in Dover
In most cases yes — Strafford County and the City of Dover generally require a permit for foundation repair. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Dover building departmentModeled estimate
- Permit fee
- Estimated allowance $85–$695Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Pier / pile installation inspection
- Final structural inspection
Local conditions that change this job
Only the exposures that materially affect foundation repair.
Cooling load / heat exposure
Severe82/100
Humidity
Severe84/100
Named-storm exposure
High70/100
Dover sits in Strafford County, New Hampshire. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per pier or pile installed |
|---|---|---|---|
| Dover (this page) | x1.077 | $10,200 | $950 – $3,250 |
| Portsmouth | x1.077 | $10,200 | $950 – $3,250 |
| Manchester | x1.112 | $10,600 | $1,000 – $3,350 |
| Concord | x1.077 | $10,200 | $950 – $3,250 |
What Dover homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Dover
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Dover foundation costs
Hometriva does not publish invented city prices. The Dover estimate for foundation repair is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for foundation repair on a single-family home.
- Local labor factorx1.091
Dover-area trade labor rates, weighted at 55% of this job.
- Material factorx1.055
Material and delivery pricing into Strafford County, weighted at 45%.
- Regulatory factorx1.004
Local code, product-approval and inspection load, applied at 40% for this project type.
- Applied multiplierx1.077
Blended Dover adjustment specific to foundation repair.
- Permit component$85 – $695
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, foundation repair in Dover carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for foundation repair pricing in Dover, NH.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does foundation repair need an engineer?
Most building departments will not issue a structural repair permit without a sealed plan or letter from a licensed engineer, and lenders and buyers usually ask for the same document later.
Why do estimates vary so much?
Price follows the number of piers and the depth required to reach competent soil. Two homes on the same street can differ by tens of thousands if one needs piers driven twice as deep.
How long does foundation repair take?
2-7 days of work, 3-8 weeks including engineering and permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are number of piers and the depth to load-bearing soil; push piers, helical piers, slab jacking or wall anchors; engineering, soil testing and survey work.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.