Garage Door Replacement cost in Silver Spring, MD

Silver Spring, MD · updated August 2026

$3,400

Typical local cost

$1,700 – $8,900

Typical range

per door installed
$1,650 – $7,100

Installed, local pricing

Permit
Yes

$100 – $385 in fees

Typical timeline
Half a day of installation

Half a day of installation, 2-6 weeks including order and permitting

Silver Spring runs +19% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Silver Spring is $3,400. The local adjustment for this trade is x1.187 — driven mainly by Montgomery County labor rates and 80% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
Single 8×7 door$1,400$7,100
Single 9×7 door$1,500$8,000
Double 16×7 door$2,000$10,700
Double insulated with opener$2,600$13,400

Based on Silver Spring pricing of $1,650–$7,100 per door installed.

Where the money goes

Labor
$1,900
52% of median
Materials
$1,500
41% of median
Permit & fees
$245
7% of median

Silver Spring project costs+19% vs U.S. average

Based on Montgomery County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Silver Spring building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    Half a day of installation, 2-6 weeks including order and permitting

  5. 05

    Inspection

    Attachment / track anchoring, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Silver Spring labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$69–$90

Exterior crews in Montgomery County · +16% vs U.S. ($68/hr)

Typical crew

2 × 1.5 days

On-site time for a typical garage door job here.

Labor in the price

$1,900

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Silver Spring wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Montgomery County labor factor (x1.156). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Silver Spring differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$250Code and inspection load$175Material and delivery$100Permit fees$25
Dollars of the Silver Spring difference owned by each driver, versus the U.S. median for garage door replacement.
  • Trade labor rates+$250

    Montgomery County crews price 16% above the national average, and labor is 55% of this job.

  • Code and inspection load+$175

    Garage Door Replacement carries 80% exposure to local code requirements, and this jurisdiction's review load indexes at x1.07.

  • Material and delivery+$100

    Materials are nationally traded, so they move less — but delivery into this market runs 8% over baseline.

  • Permit fees+$25

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Silver Spring median against the U.S. median for this scope. · City of Silver Spring building department, Hometriva methodology

Silver Spring vs Maryland vs the U.S.

Silver Spring$1,700$8,900Maryland average$1,700$8,900U.S. average$1,400$7,500
Modeled ranges for garage door replacement. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated garage door replacement in Silver Spring

$3,645

Likely range $1,945$9,145

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Single versus double door width
  • Wind load rating required for your county
  • Insulated versus non-insulated panels
  • New opener and smart controls
  • Jamb repair or reframing

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Silver Spring building departmentModeled estimate
electricalCity of Silver Spring building departmentModeled estimate
mechanicalCity of Silver Spring building departmentModeled estimate
plumbingCity of Silver Spring building departmentModeled estimate
zoningCity of Silver Spring building departmentModeled estimate
fireCity of Silver Spring building departmentModeled estimate

Permit requirement in Silver Spring

Yes — a permit is required for garage door replacement in Silver Spring, MD. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Silver Spring building departmentModeled estimate
Permit fee
Estimated allowance $100$385Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment / track anchoring
  2. Final inspection
Full Silver Spring permit guide for garage door replacement

Local conditions that change this job

Only the exposures that materially affect garage door replacement.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Silver Spring sits in Montgomery County, Maryland. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer door installed
Silver Spring (this page)x1.187$3,400$1,650$7,100
Washingtonx1.338$3,900$1,850$8,050
Rockvillex1.187$3,400$1,650$7,100
Arlingtonx1.099$3,200$1,550$6,600

What Silver Spring homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Silver Spring

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Silver Spring garage door costs

Hometriva does not publish invented city prices. The Silver Spring estimate for garage door replacement is produced by this chain, and every input is stored separately:

  1. National baseline$2,900

    Typical U.S. cost for garage door replacement on a single-family home.

  2. Local labor factorx1.156

    Silver Spring-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.083

    Material and delivery pricing into Montgomery County, weighted at 45%.

  4. Regulatory factorx1.071

    Local code, product-approval and inspection load, applied at 80% for this project type.

  5. Applied multiplierx1.187

    Blended Silver Spring adjustment specific to garage door replacement.

  6. Permit component$100 – $385

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, garage door replacement in Silver Spring carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for garage door replacement pricing in Silver Spring, MD.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for garage door replacement in Silver Spring, MD?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does garage door replacement take?

Half a day of installation, 2-6 weeks including order and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are single versus double door width; wind load rating required for your county; insulated versus non-insulated panels.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages