Gutter Installation cost in Colorado Springs, CO
Colorado Springs, CO · updated August 2026
$2,200
Typical local cost
$900 – $6,600
Typical range
- per linear foot
- $6 – $22.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $125 in fees
1 day of work
Colorado Springs runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Colorado Springs homeowners pay around $2,200. The local adjustment for this trade is x1.022 — driven mainly by El Paso County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,300 |
| 125 linear foot | $800 – $2,800 |
| 150 linear foot | $900 – $3,400 |
| 200 linear foot | $1,200 – $4,500 |
| 275 linear foot | $1,700 – $6,200 |
Based on Colorado Springs pricing of $6–$23 per linear foot.
Where the money goes
- Labor
- $1,200
- 53% of median
- Materials
- $1,000
- 44% of median
- Permit & fees
- $65
- 3% of median
Colorado Springs project costs+2% vs U.S. average
Based on El Paso County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Colorado Springs labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$61–$80
Exterior crews in El Paso County · +3% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Colorado Springs wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the El Paso County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Colorado Springs differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$25
El Paso County crews price 3% above the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Colorado Springs median against the U.S. median for this scope. · City of Colorado Springs building department, Hometriva methodology
Colorado Springs vs Colorado vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Colorado Springs
$2,265
Likely range $965 – $6,665
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Colorado Springs building departmentModeled estimate |
| electrical | City of Colorado Springs building departmentModeled estimate |
| mechanical | City of Colorado Springs building departmentModeled estimate |
| plumbing | City of Colorado Springs building departmentModeled estimate |
| zoning | City of Colorado Springs building departmentModeled estimate |
| fire | City of Colorado Springs building departmentModeled estimate |
Permit requirement in Colorado Springs
Usually no permit is required in Colorado Springs, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Colorado Springs building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$125Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
Low30/100
Named-storm exposure
Moderate42/100
Roofing and siding work is permitted through the Pikes Peak Regional Building Department rather than the city itself — a common source of homeowner confusion.
Nearby market comparison
| Market | Local factor | Median | Per linear foot |
|---|---|---|---|
| Colorado Springs (this page) | x1.022 | $2,200 | $6 – $22.50 |
| Denver | x1.120 | $2,500 | $6.50 – $24.50 |
| Albuquerque | x0.933 | $2,100 | $5.50 – $20.50 |
| Wichita | x0.887 | $2,000 | $5.50 – $19.50 |
What Colorado Springs homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Colorado Springs
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Colorado Springs gutters costs
Hometriva does not publish invented city prices. The Colorado Springs estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx1.026
Colorado Springs-area trade labor rates, weighted at 55% of this job.
- Material factorx1.011
Material and delivery pricing into El Paso County, weighted at 45%.
- Regulatory factorx1.046
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.022
Blended Colorado Springs adjustment specific to gutter installation.
- Permit component$0 – $125
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Colorado Springs carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Colorado Springs, CO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do gutters need a permit in Florida?
Standard gutter installation is generally exempt from permitting. Underground drainage that discharges to a swale, street or neighboring property can trigger a stormwater or right-of-way permit.
Sources
Sources & verification
- City of Colorado Springs building department
- Colorado Springs permit portal
- Colorado Division of Fire Prevention and Control
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.