Gutter Installation cost in Coeur d'Alene, ID
Coeur d'Alene, ID · updated August 2026
$2,100
Typical local cost
$800 – $6,100
Typical range
- per linear foot
- $5.50 – $20.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $100 in fees
1 day of work
Coeur d'Alene runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Coeur d'Alene is $2,100. The local adjustment for this trade is x0.939 — driven mainly by Kootenai County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,100 |
| 125 linear foot | $700 – $2,600 |
| 150 linear foot | $800 – $3,100 |
| 200 linear foot | $1,100 – $4,100 |
| 275 linear foot | $1,500 – $5,600 |
Based on Coeur d'Alene pricing of $6–$21 per linear foot.
Where the money goes
- Labor
- $1,200
- 56% of median
- Materials
- $900
- 42% of median
- Permit & fees
- $50
- 2% of median
Coeur d'Alene project costs-6% vs U.S. average
Based on Kootenai County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Coeur d'Alene labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$54–$70
Exterior crews in Kootenai County · -9% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Coeur d'Alene wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Kootenai County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Coeur d'Alene differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$100
Kootenai County crews price 9% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Coeur d'Alene median against the U.S. median for this scope. · City of Coeur d'Alene building department, Hometriva methodology
Coeur d'Alene vs Idaho vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Coeur d'Alene
$2,150
Likely range $850 – $6,150
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Coeur d'Alene building departmentModeled estimate |
| electrical | City of Coeur d'Alene building departmentModeled estimate |
| mechanical | City of Coeur d'Alene building departmentModeled estimate |
| plumbing | City of Coeur d'Alene building departmentModeled estimate |
| zoning | City of Coeur d'Alene building departmentModeled estimate |
| fire | City of Coeur d'Alene building departmentModeled estimate |
Permit requirement in Coeur d'Alene
A permit is usually not required for gutter installation on its own. Coeur d'Alene still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Coeur d'Alene building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$100Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
High74/100
Named-storm exposure
High70/100
Nearby market comparison
What Coeur d'Alene homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Coeur d'Alene
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Coeur d'Alene gutters costs
Hometriva does not publish invented city prices. The Coeur d'Alene estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx0.909
Coeur d'Alene-area trade labor rates, weighted at 55% of this job.
- Material factorx0.977
Material and delivery pricing into Kootenai County, weighted at 45%.
- Regulatory factorx0.992
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.939
Blended Coeur d'Alene adjustment specific to gutter installation.
- Permit component$0 – $100
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Coeur d'Alene carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Coeur d'Alene, ID.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does gutter installation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and number of downspouts; 5-inch versus 6-inch k-style profile; aluminum, steel or copper.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.