Gutter Installation cost in Kenner, LA
Kenner, LA · updated August 2026
$2,100
Typical local cost
$900 – $6,200
Typical range
- per linear foot
- $6 – $21
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $115 in fees
1 day of work
Kenner runs -4% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Kenner is $2,100. The local adjustment for this trade is x0.960 — driven mainly by Jefferson Parish labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,100 |
| 125 linear foot | $800 – $2,600 |
| 150 linear foot | $900 – $3,200 |
| 200 linear foot | $1,200 – $4,200 |
| 275 linear foot | $1,700 – $5,800 |
Based on Kenner pricing of $6–$21 per linear foot.
Where the money goes
- Labor
- $1,200
- 56% of median
- Materials
- $900
- 42% of median
- Permit & fees
- $60
- 3% of median
Kenner project costs-4% vs U.S. average
Based on Jefferson Parish labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Kenner labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$72
Exterior crews in Jefferson Parish · -6% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Kenner wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Jefferson Parish labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Kenner differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$75
Jefferson Parish crews price 6% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Kenner median against the U.S. median for this scope. · City of Kenner building department, Hometriva methodology
Kenner vs Louisiana vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Kenner
$2,160
Likely range $960 – $6,260
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Kenner building departmentModeled estimate |
| electrical | City of Kenner building departmentModeled estimate |
| mechanical | City of Kenner building departmentModeled estimate |
| plumbing | City of Kenner building departmentModeled estimate |
| zoning | City of Kenner building departmentModeled estimate |
| fire | City of Kenner building departmentModeled estimate |
Permit requirement in Kenner
A permit is usually not required for gutter installation on its own. Kenner still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Kenner building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$115Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
High74/100
Named-storm exposure
High70/100
Kenner sits in Jefferson Parish, Louisiana. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per linear foot |
|---|---|---|---|
| Kenner (this page) | x0.960 | $2,100 | $6 – $21 |
| New Orleans | x1.064 | $2,300 | $6.50 – $23.50 |
| Baton Rouge | x0.980 | $2,200 | $6 – $21.50 |
| Gulfport | x0.861 | $1,900 | $5 – $19 |
What Kenner homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Kenner
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Kenner gutters costs
Hometriva does not publish invented city prices. The Kenner estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx0.935
Kenner-area trade labor rates, weighted at 55% of this job.
- Material factorx0.988
Material and delivery pricing into Jefferson Parish, weighted at 45%.
- Regulatory factorx1.027
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.960
Blended Kenner adjustment specific to gutter installation.
- Permit component$0 – $115
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Kenner carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Kenner, LA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does gutter installation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and number of downspouts; 5-inch versus 6-inch k-style profile; aluminum, steel or copper.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.