Gutter Installation cost in Wilmington, NC
Wilmington, NC · updated August 2026
$2,100
Typical local cost
$800 – $6,100
Typical range
- per linear foot
- $5.50 – $20.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $110 in fees
1 day of work
Wilmington runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Wilmington is $2,100. The local adjustment for this trade is x0.940 — driven mainly by New Hanover County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,100 |
| 125 linear foot | $700 – $2,600 |
| 150 linear foot | $800 – $3,100 |
| 200 linear foot | $1,100 – $4,100 |
| 275 linear foot | $1,500 – $5,600 |
Based on Wilmington pricing of $6–$21 per linear foot.
Where the money goes
- Labor
- $1,200
- 56% of median
- Materials
- $900
- 42% of median
- Permit & fees
- $55
- 3% of median
Wilmington project costs-6% vs U.S. average
Based on New Hanover County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Wilmington labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$54–$70
Exterior crews in New Hanover County · -9% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Wilmington wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the New Hanover County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Wilmington differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$100
New Hanover County crews price 9% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Wilmington median against the U.S. median for this scope. · City of Wilmington building department, Hometriva methodology
Wilmington vs North Carolina vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Wilmington
$2,155
Likely range $855 – $6,155
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Wilmington building departmentModeled estimate |
| electrical | City of Wilmington building departmentModeled estimate |
| mechanical | City of Wilmington building departmentModeled estimate |
| plumbing | City of Wilmington building departmentModeled estimate |
| zoning | City of Wilmington building departmentModeled estimate |
| fire | City of Wilmington building departmentModeled estimate |
Permit requirement in Wilmington
A permit is usually not required for gutter installation on its own. Wilmington still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Wilmington building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$110Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
High74/100
Named-storm exposure
High70/100
Nearby market comparison
| Market | Local factor | Median | Per linear foot |
|---|---|---|---|
| Wilmington (this page) | x0.940 | $2,100 | $5.50 – $20.50 |
| Myrtle Beach | x0.901 | $2,000 | $5.50 – $20 |
| Fayetteville | x0.960 | $2,100 | $6 – $21 |
| Raleigh | x0.983 | $2,200 | $6 – $21.50 |
What Wilmington homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Wilmington
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Wilmington gutters costs
Hometriva does not publish invented city prices. The Wilmington estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx0.909
Wilmington-area trade labor rates, weighted at 55% of this job.
- Material factorx0.977
Material and delivery pricing into New Hanover County, weighted at 45%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.940
Blended Wilmington adjustment specific to gutter installation.
- Permit component$0 – $110
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Wilmington carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Wilmington, NC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does gutter installation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and number of downspouts; 5-inch versus 6-inch k-style profile; aluminum, steel or copper.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.