Gutter Installation cost in Dallas, TX
Dallas, TX · updated August 2026
$2,200
Typical local cost
$900 – $6,400
Typical range
- per linear foot
- $6 – $21.50
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $125 in fees
1 day of work
Dallas runs -2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Dallas is $2,200. The local adjustment for this trade is x0.985 — driven mainly by Dallas County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,200 |
| 125 linear foot | $800 – $2,700 |
| 150 linear foot | $900 – $3,200 |
| 200 linear foot | $1,200 – $4,300 |
| 275 linear foot | $1,700 – $5,900 |
Based on Dallas pricing of $6–$22 per linear foot.
Where the money goes
- Labor
- $1,200
- 53% of median
- Materials
- $1,000
- 44% of median
- Permit & fees
- $65
- 3% of median
Dallas project costs-2% vs U.S. average
Based on Dallas County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Dallas labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$76
Exterior crews in Dallas County · -3% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Dallas wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Dallas County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Dallas differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$25
Dallas County crews price 3% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Dallas median against the U.S. median for this scope. · City of Dallas building department, Hometriva methodology
Dallas vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Dallas
$2,265
Likely range $965 – $6,465
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Dallas building departmentModeled estimate |
| electrical | City of Dallas building departmentModeled estimate |
| mechanical | City of Dallas building departmentModeled estimate |
| plumbing | City of Dallas building departmentModeled estimate |
| zoning | City of Dallas building departmentModeled estimate |
| fire | City of Dallas building departmentModeled estimate |
Permit requirement in Dallas
A permit is usually not required for gutter installation on its own. Dallas still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Dallas building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$125Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
Moderate48/100
Named-storm exposure
High74/100
Nearby market comparison
| Market | Local factor | Median | Per linear foot |
|---|---|---|---|
| Dallas (this page) | x0.985 | $2,200 | $6 – $21.50 |
| Irving | x0.980 | $2,200 | $6 – $21.50 |
| Grand Prairie | x0.980 | $2,200 | $6 – $21.50 |
| Garland | x0.980 | $2,200 | $6 – $21.50 |
+ Had gutter installation done in Dallas? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Dallas gutters costs
Hometriva does not publish invented city prices. The Dallas estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx0.974
Dallas-area trade labor rates, weighted at 55% of this job.
- Material factorx0.992
Material and delivery pricing into Dallas County, weighted at 45%.
- Regulatory factorx1.054
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.985
Blended Dallas adjustment specific to gutter installation.
- Permit component$0 – $125
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Dallas carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Dallas, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much do new gutters cost?
Most U.S. gutter installations cost about $900 to $6,500, or roughly $6 to $22 per linear foot. Seamless aluminum sits at the lower end; steel, copper and added gutter guards push the price up.
Should I get 5-inch or 6-inch gutters?
5-inch K-style gutters suit most homes. 6-inch gutters carry about 40% more water and are worth it for large or steep roofs, heavy-rain regions, and roofs that drain into a single long run.
Are gutter guards worth the cost?
Under heavy tree cover, guards can cut cleaning from several times a year to occasional checks. They add to the installed price, so for homes with few trees nearby, regular cleaning is often cheaper.
How long do gutters last?
Aluminum gutters commonly last 20 years or more, galvanized steel somewhat less before rust sets in, and copper can last 50 years or more. Keeping them clean and pitched correctly extends their life.
Sources
Sources & verification
- City of Dallas building department
- Dallas permit portal
- Texas Department of Licensing and Regulation
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.