Gutter Installation cost in Green Bay, WI
Green Bay, WI · updated August 2026
$2,200
Typical local cost
$900 – $6,400
Typical range
- per linear foot
- $6 – $22
- Permit
- Usually no
- Typical timeline
- 1 day of work
Installed, local pricing
$0 – $110 in fees
1 day of work
Green Bay runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Green Bay is $2,200. The local adjustment for this trade is x0.989 — driven mainly by Brown County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 100 linear foot | $600 – $2,200 |
| 125 linear foot | $800 – $2,800 |
| 150 linear foot | $900 – $3,300 |
| 200 linear foot | $1,200 – $4,400 |
| 275 linear foot | $1,700 – $6,100 |
Based on Green Bay pricing of $6–$22 per linear foot.
Where the money goes
- Labor
- $1,200
- 53% of median
- Materials
- $1,000
- 44% of median
- Permit & fees
- $55
- 2% of median
Green Bay project costs-1% vs U.S. average
Based on Brown County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of work
05
Closeout
Final sign-off, warranty and documentation
Green Bay labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$76
Exterior crews in Brown County · -3% vs U.S. ($68/hr)
Typical crew
2 × 1 day
On-site time for a typical gutters job here.
Labor in the price
$1,200
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Green Bay wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Brown County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Green Bay differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$25
Brown County crews price 3% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Green Bay median against the U.S. median for this scope. · City of Green Bay building department, Hometriva methodology
Green Bay vs Wisconsin vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated gutter installation in Green Bay
$2,255
Likely range $955 – $6,455
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and number of downspouts
- 5-inch versus 6-inch K-style profile
- Aluminum, steel or copper
- Gutter guards
- Underground downspout drainage
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Green Bay building departmentModeled estimate |
| electrical | City of Green Bay building departmentModeled estimate |
| mechanical | City of Green Bay building departmentModeled estimate |
| plumbing | City of Green Bay building departmentModeled estimate |
| zoning | City of Green Bay building departmentModeled estimate |
| fire | City of Green Bay building departmentModeled estimate |
Permit requirement in Green Bay
A permit is usually not required for gutter installation on its own. Green Bay still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Green Bay building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$110Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect gutter installation.
Annual rainfall
High74/100
Named-storm exposure
High70/100
Nearby market comparison
What Green Bay homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Green Bay
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Green Bay gutters costs
Hometriva does not publish invented city prices. The Green Bay estimate for gutter installation is produced by this chain, and every input is stored separately:
- National baseline$2,200
Typical U.S. cost for gutter installation on a single-family home.
- Local labor factorx0.974
Green Bay-area trade labor rates, weighted at 55% of this job.
- Material factorx1.005
Material and delivery pricing into Brown County, weighted at 45%.
- Regulatory factorx1.019
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.989
Blended Green Bay adjustment specific to gutter installation.
- Permit component$0 – $110
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, gutter installation in Green Bay carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for gutter installation pricing in Green Bay, WI.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does gutter installation take?
1 day of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and number of downspouts; 5-inch versus 6-inch k-style profile; aluminum, steel or copper.
Sources
Sources & verification
- Wisconsin Department of Safety and Professional Services
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.