Interior Painting cost in High Point, NC
High Point, NC · updated August 2026
$3,500
Typical local cost
$1,400 – $8,800
Typical range
- per sq ft of floor area
- $1.50 – $4.50
- Permit
- Usually no
- Typical timeline
- 2-5 days of work
Installed, local pricing
$0 – $0 in fees
2-5 days of work
High Point runs -7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for High Point is $3,500. The local adjustment for this trade is x0.925 — driven mainly by Guilford County labor rates and 5% exposure to local code requirements.
Estimate your High Point job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Paint needed
2.3 gallons
2 coats
- Paintable area
- 396 sq ft
- Buy
- 3 gallons
- Primer (1 coat)
- 1.2 gallons
- Paint cost estimate
- $105 – $216
Priced for High Point (local adjustment x0.925).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 700 sq ft of floor area | $1,100 – $3,200 |
| 900 sq ft of floor area | $1,400 – $4,100 |
| 1,100 sq ft of floor area | $1,700 – $5,000 |
| 1,500 sq ft of floor area | $2,300 – $6,800 |
| 1,900 sq ft of floor area | $2,900 – $8,600 |
Based on High Point pricing of $2–$5 per sq ft of floor area.
Where the money goes
- Labor
- $2,700
- 77% of median
- Materials
- $800
- 23% of median
- Permit & fees
- $0
- 0% of median
High Point project costs-7% vs U.S. average
Based on Guilford County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 days of work
05
Closeout
Final sign-off, warranty and documentation
High Point labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$46–$60
Interior crews in Guilford County · -9% vs U.S. ($58/hr)
Typical crew
2 × 3 days
On-site time for a typical interior paint job here.
Labor in the price
$2,700
78% of the median — the rest is material, disposal and permit.
Because labor is 78% of this job, High Point wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Guilford County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why High Point differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$275
Guilford County crews price 9% below the national average, and labor is 78% of this job.
Basis: Decomposition of the modeled High Point median against the U.S. median for this scope. · City of High Point building department, Hometriva methodology
High Point vs North Carolina vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated interior painting in High Point
$3,500
Likely range $1,400 – $8,800
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Wall square footage and ceiling height
- Number of coats and color changes
- Trim, doors and ceilings included
- Drywall patching and prep
- Paint grade
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of High Point building departmentModeled estimate |
| electrical | City of High Point building departmentModeled estimate |
| mechanical | City of High Point building departmentModeled estimate |
| plumbing | City of High Point building departmentModeled estimate |
| zoning | City of High Point building departmentModeled estimate |
| fire | City of High Point building departmentModeled estimate |
Permit requirement in High Point
A permit is usually not required for interior painting on its own. High Point still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of High Point building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$0Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect interior painting.
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per sq ft of floor area |
|---|---|---|---|
| High Point (this page) | x0.925 | $3,500 | $1.50 – $4.50 |
| Greensboro | x0.948 | $3,600 | $1.50 – $4.50 |
| Winston-Salem | x0.948 | $3,600 | $1.50 – $4.50 |
| Durham | x0.948 | $3,600 | $1.50 – $4.50 |
What High Point homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in High Point
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates High Point interior paint costs
Hometriva does not publish invented city prices. The High Point estimate for interior painting is produced by this chain, and every input is stored separately:
- National baseline$3,800
Typical U.S. cost for interior painting on a single-family home.
- Local labor factorx0.909
High Point-area trade labor rates, weighted at 78% of this job.
- Material factorx0.977
Material and delivery pricing into Guilford County, weighted at 22%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.925
Blended High Point adjustment specific to interior painting.
- Permit component$0 – $0
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, interior painting in High Point carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for interior painting pricing in High Point, NC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much paint do I need for a room?
One gallon covers roughly 350 to 400 square feet per coat. Multiply wall length by ceiling height, subtract openings, then double it for two coats.
How long does interior painting take?
2-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are wall square footage and ceiling height; number of coats and color changes; trim, doors and ceilings included.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.